Videofied W-Series wireless video-verification indoor ethernet/internet security system by GeoArm Security. This Videofied W-Series kit includes; wireless indoor control panel (WIP620), wireless vertical alpha alarm keypad (XMA621), and an wireless indoor MotionViewer camera (IMV601).
The Videofied WIP620 ethernet-only W Panel is designed for securing residential and small commercial properties where an Ethernet/IP or Wi-Fi connection is available. The W alarm panel protects assets and persons in a defined area, thanks to the installations of RSI radio detectors. With their LAN or 2G3G transmitters, the events are perfectly transmitted from the W and WIP panels to the security server. The available variants allow for any needed combination : LAN, 2G, 2G+LAN, 3G+LAN. The WIP210 panel is fitted with two transmitters (2G3G and LAN), allowing perfect reporting to the security server. This panel is powered by USB 5VDC (5VDC for WIP6xx and WIP 7xx) through an AC adapter/charger. In case of power failure, a rechargeable lithium battery will power the system.
With the two modes of transmission, LAN/WLAN and GSM, the W-series panel ensures maximum safety. In case of LAN/WLAN connection loss, the W panel will switch immediately to GSM to transmit alarms and videos.
The W-series, along with all Videofied devices uses patented S2View® - Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology, providing optimum signal integrity and security. Bi-directional RF communication between all system devices and the system control panel assure high signal reliability. Integrated antennas eliminate protruding wires or rods cumbersome to install and unsightly to consumers, and if damaged could lead to potential system communication problems. The panel supervises every device (excluding the remote keyfob) to monitor current open/close state, tamper condition, serial number, date of manufacture, firmware revision, and battery status.
Modular expansion allows for; Wi-Fi communication to customer router (see WWB100 Wi-Fi Board), Inputs and outputs for upgrades to existing burglar alarm systems and integration with third-party devices (see WIO100 Input/Output Board), and a wired indoor siren (WIS100 Wired Siren) that can be attached to the panel or detached.
Up to 24 wireless zones/devices
Video Verification - video resolution of 320 x 240 pixels, 0 lux sensitivity, 5-frames per second for approx. 10 seconds total recording time. 220K MPEG file.
Programming - An alphanumeric keypad (XMA621 or WMB621) or the Frontel Installer Software (with the TMT USB Programming Kit) is required for programming and maintenance
Communication to devices - 915 MHz RF (military grade, spread spectrum, AES encrypted)
Communication to central station - Ethernet/IP (Dynamic or Static)
RF Range - 250-500 ft (varies by environment, amount of obstructions like metal, earth and concrete)
Mapping feature to trigger a video upon activation of a programmable input