Support Center   1-877-443-6276

IMV601 - Videofied Wireless Indoor MotionViewer™ Security Camera

IMV601 - Videofied Wireless Indoor MotionViewer Security Camera
IMV601 - Videofied Wireless Indoor MotionViewer Security Camera
Item# IMV601
List Price: $164.98
Your Price: $109.99
Availability: In Stock

Videofied IMV601 MotionViewer:

The Videofied IMV601 Indoor MotionViewer® is a battery-powered device that includes an integrated PIR motion sensor, digital video camera and infrared illuminators. The IMV601 is designed to detect an intruder, instantaneously record a short video clip and send it over military-grade RF to the control panel which then transmits the alarm signal + video clip to a monitoring station via cell or Ethernet. After receiving and reviewing the video clip, GEOARM alarm monitoring operators will verify the intrusion event and dispatch to law enforcement for priority response to a crime-in-progress. These motion-activated cameras are intended for applications where video verification of intrusion alarms is necessary or desired.

The IMV601 consists of a digital camera, a passive infrared motion detector, and S2View® spread spectrum, videofied interactive, encrypted wireless circuitry for secure two-way communications with the control panel. The camera consists of a CMOS color sensor and an 110°, wide angle lens. Two infrared LEDs provide a night illumination distance of approximately 23 feet/7 meters. For motion or movement detection, a fresnel lens inside the cover captures a up to 40-foot wide, 90° angle passive infrared pattern. The base allows for flat wall or corner mounting. A dual tamper function provides for both wall and cover tamper detection.

The IMV601 MotionViewer camera is typically installed to cover rooms, hallways, stairwells, and other similar areas where detection coverage is needed. When the alarm system is armed and the motion detector senses heat motion, the detector transmits a signal and activates the camera, which captures up to a 10-second digital video segment. The control panel receives the signal and responds according to system configuration/programming.

The alarm and video segment are reported via the control panel to the central monitoring station. The detector is powered by three lithium batteries that can last up to four years or more, depending on the amount of detector activity.

Product Features:

  • Night illumination: Up to 23 ft./7 m distance using two infrared LEDs
  • Military grade RF to and from control panel
  • Temperature range: +14/+122°F (-10/+50°C)
  • Up to 4 years Lithium battery life (for low alarm activity)
  • Wireless technology provides optimum signal integrity and security
  • Video: color/day, monochrome/night
  • S2View®- Spread Spectrum, Videofied, Interactive, AES Encrypted Wireless technology
  • Camera: CMOS sensor with 110° wide angle lens and adjustable video resolution of 320 x 240 pixels
  • Motion detector: dual-element, passive infrared with fresnel lens for up to 40 ft./12 m wide, 90° coverage pattern
  • Camera records color during the day and black and white at night
  • Supervised: transmits a check-in/status signal to the panel every 8 minutes indicating unique identification code along with the current detection sensor state, tamper condition, serial number, manufacture date, software revision, and battery status
  • Dual tamper: provides cover and wall tamper detection


Q & A's : Videofied IMV601 Wireless Indoor MotionViewer Security Camera

comments powered by Disqus