The DSC TR5164-433 is a two-way wireless transceiver module that adds wireless capability to any DSC PowerSeries PC1616, PC1832 and PC1864 control panel. The TR5164-433 wireless receiver can support up to 4 wire-free keypads, 60 wireless zones and 16 wireless keys (wireless keys do not use up zone slots). The TR5164-433 receives signals from wireless zones and wireless keys, and provides information to the alarm controller it is connected to.
The TR5164-433 transceiver has separate built-in wall and case tampers. The tampers are disabled by default. Reduce installation time and provide coverage for areas where running wire is not an option. When the TR5164 is property installed, the wall tamper on the back of the unit should be depressed by the mounting surface. If the unit is removed, the tamper activates. The case tamper activates when the case is opened and restores when the case is closed.
The TR5164-433 features three status LEDs to help with the installation of wireless devices and troubleshoot the operation of the receiver. The LEDs flash to indicate whether the signal received is from an enrolled device or if interference is detected. When in individual placement test mode, the receiver will flash green only if the serial number of the device being tested is received. All other signals, including signals from valid enrolled devices, will flash red.
For proper unit tamper operation, the surface that the TR5164 is mounted to should be smooth and free of obstructions that block access to the rear of the unit. Ensure that electrical wires do not run over and under the module when it is mounted.
Supports both 2-way and 1-way wireless devices
Supports 4 wire-free keypads WT5500
Supports 16 Wireless Keys (any combination of 1-way or 2-way wireless keys)
Supports 60 wireless zones on PC1864
8-partition support for 1-way wireless keys
Separate, built-in wall and case tampers
Easy wireless enrollment process with WT5500
3 status LEDs
Compatible with PC1616, PC1832 and PC1864 v4.6+
Backed by DSC's 1-year limited manufacturer's warranty
Central to the proposed placement of all wireless devices
As high as possible. The range of the module is reduced if mounted below ground level.
Far from sources of interference, including: electrical noise (computers, televisions, electric motors, appliances, heating and air conditioning units), large metal objects like heating ducts and plumbing which may shield the electro-magnetic waves
Smooth and free of obstructions that block access to the rear of the unit