Support Center   1-877-443-6276

ZW122 - Aeotec Z-Wave Water Sensor 6

ZW122 - Aeotec Z-Wave Water Sensor 6
Please Note: The Aeotec ZW122 water sensor has been discontinued without replacement.

Aeotec ZW122 Product Description:


The Aeotec ZW122 is a Z-Wave water sensor that monitors against floods, leaks and water conditions.

The ZW122 water sensor 6 not only monitors for when a pipe has burst or is leaking, it can also take protective measures to help limit the amount of damage caused. Using the power of Z-Wave you can put Water Sensor 6 in control of other Z-Wave devices so that, when the worst occurs, the ZW122 can do anything from sending alerts to turning off electricity and water valves in order to protect your home and your loved ones.

Leaks often happen in the worst of places. Behind things, under things, and in all those hard-to-see places that mean you donít see the leak until it's far too late. That's why the ZW122 water sensor 6 is so slim. It is only 3.8cm wide and 2.4cm tall. That means Water Sensor 6 will fit and blend in wherever you need it, whether that's in a hard to reach space or one where it can be seen.

The ZW122 water sensor 6 is a part of our Z-Wave intelligence range. It's been designed to protect your home and it's also been designed to make your smart home smarter. Four separate sensors are crafted into each Water Sensor 6. Each of these sensors can be used to create intelligent home control scenarios via your Z-Wave gateway including the management of underfloor heating, HVAC control, and driveway heating.

Product Features:

  • Leaks & bursts: Water Sensor 6 can detect minuscule amounts of water - as little as 0.5mm / 0.02" of water. That makes it your first line of defence against damaged plumbing.
  • Floods: Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements.
  • Overflows: Accidents happen but that doesn't make the damage caused by forgotten taps any less expensive. Water Sensor 6 can alert you to the water you've forgotten to turn off before it's too late.
  • Auto-close water valves: In the event of a pipe burst, use Water Sensor 6 to turn off electronic water valves via Z-Wave.
  • Turn on sump pumps: When water is detected, turn on electronic sump pumps your gateway or Z-Wave switches.
  • Auto turn off power: Water and electricity don't mix. Protect your home and family by turning off electronics in the event of a leak or flood.
  • Water sensor: 4 gold tipped water probes actively monitor for leaks and drips.
  • Tilt sensor: Whether moved by water or by a person, Water Sensor 6's tilt sensor will issue a tilt alert.
  • Vibration sensor: Tamper and emergency events are confirmed by an algorithm that includes vibration detection.
  • Temperature sensor: Crafted for heating management, an inbuilt temperature sensor can monitor temperatures between -20°C and 100°C (-4°F to 212°F).

Aeotec ZW122 Product Specifications:


  • Operating temperature: 32°F to 104°F (0°C to 40°C)
  • Storage temperature: -20°C to 60°C
  • Operating humidity: 8% to 80%
  • Operating distance: Up to 492 feet/150 meters outdoors
  • Buzzer Max Volume: 60dB from 2 meters
  • Sensors: Air Temperature, Water Flow
  • Supported Notification Types: Heat Alarm, Home Security, Water Alarm
  • Power Supply: CR123A lithium battery, 3V / 1500mA
  • Repeater: No
  • Water proofing: IP65 rating
  • Z-Wave Plus Certified: Yes
  • Battery life: CR123A, 3V, 1500mAh (2.3 years with default settings with estimated leakage events 5 times per month)

Q & A's : Aeotec ZW122 Z-Wave Water Sensor 6


comments powered by Disqus