The VISTA 20P is a high capacity, feature-rich, 48-zones control panel that delivers more value to the DiYer. The VISTA 20P comes with 8 on-board hardwired zones (up to 15 with zone doubling), up to 40 hardwired zones with expansion (8 on-board zones + 32 expansion zones = 40 total hardwired zones), and up to 40 wireless expansion zones. Additionally, the VISTA 20P supports up to 16 wireless keyfobs, up to 48 user codes and up to 32 schedules. With the VISTA 20P you can have remote programming capability, add graphic keypad support and up to 2 partitions. The VISTA 20P's installation advantages, innovative end-user benefits and robust system capacity make the value-priced security system an ideal choice for higher-end DiY installations.
•Alarm reporting and uploading/ downloading capability for Internet and Intranet use via 7847i, LTE-XA, LTE-XV, LTE-IV or LTE-HSV alarm communicators
•Supports four graphic touchscreen keypads
•Wireless keys can be programmed without using zones
•Eight on-board hardwired zones standard (15 when Zone Doubling feature is used) -40 wireless expansion zones -40 hardwire expansion zones
•Two low current on-board trigger outputs
•100 Event Log viewable at system keypads with time/date stamp
•48 system user codes assignable to either partition
•Expandable to 48 total zones when used with hardwired and/or wireless expansion modules
•Two independent partitions plus a common partition -Global Arming from any system keypad -Go to function to view or operate one partition from the other  :-Separate partition account numbers
•Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes
•Supports four-wire and up to 16 two-wire smokes -Works with Sentrol CleanMe™ maintenance signal
•Multiple actions on output devices depending on system state -Turns lights off when system arms -Turns the same light on when system disarms -Flashes same lights when system is in alarm
•Built-in phone line cut monitor with programmable delay and annunciation options -Display on system keypads -Trigger local sounders -Trigger system bell
•Viewable on system keypads: -Exit countdown -Time and date display* -Event log*
•Auto keypad backlighting on entry
•Keyswitch arming
•Programmable macro buttons and single-button arming
•Supports a variety of wireless remote controls for single-button operation
•VIP Module allows system control from any touchtone phone
•Chime by zone
•User Scheduling -Latchkey reports to pagers -Auto arm/disarm -“User access” time windows