The Resideo Honeywell Home 5800SMOKEV is a 3V lithium-powered, photoelectric multi-criteria detector that has a built-in wireless transmitter capable of detecting smoke, heat, rate-of-rise and low temperature.
The 5800SMOKEV meets UL 268 7th Edition requirements, which provides early detection, while also reducing nuisance alarms from everyday cooking. The 5800SMOKEV has improved detection of smoke from common synthetic materials found in many modern home furnishings, which typically burn faster and hotter.
This comprehensive detector is particularly ideal for hard-to-wire locations or where hazardous materials exist, and features a small, sleek design for locations where aesthetics are of utmost importance. The built-in sounder provides clear, audible annunciation during potential incidents and low battery conditions.
The 5800SMOKEV is compatible with any Resideo Security Control System that supports 5800 technology (VISTA®, LYNX, Lyric®, ProSeries) and utilizes either a 5800 style RF receiver or the PROTAKEOVER module.
Minimize Nuisance Alarms: Mathematical calculations smooth out short term spikes from dust/smoke and drift compensation adjusts the detector's sensitivity to minimize false alarms
Easy to Install: Sturdy, versatile mounting base and quick battery pull tabs allows for hassle-free installations
LED Status Indicators: Easily visible LEDs indicate power, sensor trouble, alarm and low battery status
Supports High/Low Maintenance: Monitors the smoke chamber and alerts when maintenance is needed
Quickly Check Unit Functionality: Easily accessible test button to check unit functionality
Residential and Commercial Applications: Meets both residential and commercial installation requirements
Smoke Detection: Alarms when smoke is detected
Heat Detection: Alarms when detected temperature is 135°F (57°C) or greater
Rate-of-Rise: Alarms when temperature is >104°F (40°C) @ 15°F/minute (8.33°C/minute)
Low Temperature Sensing: Senses ambient temperature and reports if temperature drops below 41°F (5°C)
Tamper Mode: Activates when the detector is removed from the mounting base or the tamper switch is closed and opened
Supervision: The detector will transmits its status every 60 to 70 minutes