Honeywell Home VISTA 20P Cellular Verizon LTE Hardwired Security System (Powered by AlarmNet)

* Parts listed above with an asterisk symbol require a subscription to Total Connect 2.0 powered by GeoArm.

▼ Compatible Hardwired Security Sensors ▼

Description
PDF Documents
Specifications
Kit Includes

Honeywell VISTA 20P Kit Description:

The Honeywell VISTA20P-CELL-LTEM-XV-SWAP is a VISTA 20P cellular security system kit designed for Verizon LTE alarm communications to the GeoArm central monitoring station. The VISTA 20P is a high capacity, feature-rich, 48-zones control panel that delivers more value to the DiYer.

The VISTA 20P comes with 8 on-board hardwired zones (up to 15 with zone doubling), up to 40 hardwired zones with expansion (8 on-board zones + 32 expansion zones = 40 total hardwired zones), and up to 40 wireless expansion zones. Additionally, the VISTA 20P supports up to 16 wireless keyfobs, up to 48 user codes and up to 32 schedules. With the VISTA 20P panel you get remote programming capability, graphic keypad support and 2 partitions. The VISTA 20P's installation advantages, innovative end-user benefits and robust system capacity make the value-priced security system an ideal choice for higher-end DiY installations.

The VISTA 20P cellular security system is backed by Honeywell's 2-year limited manufacturer's warranty and once upgraded with a Honeywell wireless alarm receiver is compatible with the full line of Honeywell 5800-Series wireless security products. GeoArm and Honeywell give you the options you need to fully customize your DiY security system.

Honeywell VISTA 20P Cellular Security System Applications:

Homes
Townhomes
Apartments/Condos
Offices
Retail Spaces
Small Businesses
Warehouses
Convenience Stores
Gas Stations
Churches

Honeywell VISTA 20P Cellular Security System DiY Installation Notes:
When designing your system, keep in mind that the Honeywell VISTA 20P security system supports up to forty-eight (48) total zones with expansion modules but only supports eight (8) hardwired zones without expansion. You should add the Honeywell 4219 hardwired 8-zone expansion modules if you want to add more than eight (8) hardwired zones to your VISTA 20P security system. This VISTA 20P security system kit comes equipped to send its alarm signals over the cellular Verizon LTE network. The Honeywell LTEM-XV cellular alarm communicator sends your alarm signals over the cellular AT&T LTE network to the GeoArm central monitoring station.

With an AlarmNet alternative communicator in place (such as the LTEM-XV), you would no longer need traditional phone service at the property to monitor your VISTA 20P security system. The alternative communicator would also allow you to upgrade to GeoArm's Total Connect interactive alarm monitoring services, which enables you to receive important alerts, keep a close eye on your home and control your security system remotely via the internet and/or mobile devices you use each and every day. Isn't it time you got connected? Save money and take control of your business or home security with GeoArm.

Honeywell VISTA 20P Kit Documents:

• Data Sheet for Honeywell VISTA 20P Control Panel
• User Guide for Honeywell VISTA 20P Control Panel
• Quick Installation Guide for Honeywell VISTA 20P Control Panel
• Installation/Setup Guide for Honeywell VISTA 20P Control Panel
• Residential Sales Brochure for Honeywell VISTA-Series Control Panels
• Commercial Sales Brochure for Honeywell VISTA-Series Control Panels
• Comparison Chart for Honeywell VISTA-Series Control Panels
• Programming Guide for Honeywell VISTA 20P Control Panel

Honeywell VISTA 20P Kit Specifications:

•Alarm reporting and uploading/ downloading capability for Internet and Intranet use via 7847i, LTEM-XA, LTEM-XV, LTE-IV or LTE-HSV alarm communicators

•Supports four graphic touchscreen keypads

•Wireless keys can be programmed without using zones

•Eight on-board hardwired zones standard (15 when Zone Doubling feature is used)
  -40 wireless expansion zones
  -40 hardwire expansion zones

•Two low current on-board trigger outputs

•100 Event Log viewable at system keypads with time/date stamp

•48 system user codes assignable to either partition

•Expandable to 48 total zones when used with hardwired and/or wireless expansion modules

•Two independent partitions plus a common partition
  -Global Arming from any system keypad
  -Go to function to view or operate one partition from the other
  -Separate partition account numbers

•16 output devices
  -Relays (Model 4204 Relay Modules, or 4229 Expansion Module)

•Four installer-configurable zone types allows the installer to create custom zone types by assigning all zone attributes

•Supports four-wire and up to 16 two-wire smokes
  -Works with Sentrol CleanMe™ maintenance signal

•Multiple actions on output devices depending on system state
  -Turns lights off when system arms
  -Turns the same light on when system disarms
  -Flashes same lights when system is in alarm

•Built-in phone line cut monitor with programmable delay and annunciation options
  -Display on system keypads
  -Trigger local sounders
  -Trigger system bell

•Viewable on system keypads:
  -Exit countdown
  -Time and date display*
  -Event log*

•Auto keypad backlighting on entry

•Keyswitch arming

•Programmable macro buttons and single-button arming

•Supports a variety of wireless remote controls for single-button operation

•VIP Module allows system control from any touchtone phone

•Chime by zone

•User Scheduling
  -Latchkey reports to pagers
  -Auto arm/disarm
  -"User access" time windows

*Requires custom alpha keypad