RE508X - Alula Universal Hardwired-to-Wireless RF Alarm Signal Translator (for All Brands)
Alula RE508X Product Description:
The Alula RE508X is a universal hardwired-to-wireless translation device for supporting multiple sensor-panel combinations. In addition to being a translator, you may choose to use the RE508X as a wireless repeater to extend the range of installations from the control panel.
The RE508X translator/repeater is compatible with the DSC, Honeywell, Interlogix and 2GIG control panels and new/existing hardwired equipment. With the RE508X universal translator, you can add your existing hardwired security sensors using the 8 hardwired loops with end-of-line resistors. The device is UL compliant and it comes with the power supply and back-up battery included.
When mounting the RE508X translator, choose a location that is at least 5 feet from the control panel's receiver. Do NOT mount the translator in a metal can or on a metal surface. Verify adequate RF signal strength at the panel before permanently mounting. Continue by wiring the zones into the RE508X translator. Next, connect 12VDC output to powered zone, if any. Lastly, connect the power supply to the RE508X translator using either the supplied barrel connector or flying leads.
Product Features:
- Compatible with any hardwired sensors going to the various wireless panels
- 8 Hardwire loops with end-of-line resistor detection
- Unique wireless ID (or loop) for each zone
- Unique wireless ID for the device itself
- Transmit diversity for a long reliable range
- PIR powering (via external supply)
- External 12VDC power supply (Included)
- Device low battery detect
- Device tamper detect
- Selectable wireless panel compatibility
- Rechargeable backup battery
- Automatic zone polarity and end of line detection
- Battery backed 12VDC output for powered zones
- Cover tamper
- Compatible with 2GIG, DSC, GE Interlogix and Qolsys
- Certified to UL1023, ULC1023, UL1610, and ULC S304
Alula RE508X Product Specifications:
- Dimensions: 8.5 x 5.0 x 1.3 inches
- Weight with Battery: 16.0 Ounces
- Tamper Activation: Cover Opening, Wall Removal
- Mounting Screws: #4 or #6 (not included)
- Operating Temperature: 32 to 120°F (0 to 49°C)
- Storage Temperature: -4 to 86°F (-20 to 30°C), Long-Term
- Maximum Humidity: 85% non-condensing relative humidity
- 12VDC Output: 10.2VDC to 13VDC, 150mA Max (80mA Max for UL installations)
- Power Transformer Input: 100-240VAC 50/60Hz 0.5A
- Power Transformer Output: 12VDC 1A
- Power Transformer Part Number: RE012-6
- Battery Specifications: 6VDC 800mAh NiMH
- Battery Part Number: RE030
- Trickle Charge: 8mA
- Fast Charge: 32mA
- Wireless Radio RF Frequency: 319.5MHz, 345MHz, 433.92MHz
- Wireless Radio Compatibility: Cryptix® (Connect+), Interlogix® (formerly GE®), Honeywell®, DSC®, 2GIG®, Qolsys®
- Supported Type Powered Zones: 4-wire devices only
- Supported Type Non-Powered Zones: NC (Normal closed) or NO (Normal open)
- Backup Battery Powered Zones: 4 hours minimum at 80mA
- Backup Battery Non-Powered Zones: 24 hours minimum
- NC - No Tamper Detect (Zone End of Line Resistor): None (short)
- NC - Tamper Detect (Zone End of Line Resistor): 750 ohm to 15k ohm
- NO - No Tamper Detect (Zone End of Line Resistor): None (open)
- NO - Tamper Detect (Zone End of Line Resistor): 750 ohm to 15k ohm
- Zone Wire Length: 1000 feet max
- Zone Wire Gauge: 22 AWG min
- ETL Listings: UL1023, ULC1023
- Other Certification: FCC, IC
