▼ Compatible Hardwired Security Sensors ▼
The Honeywell VISTA15P-SWAP is a VISTA 15P security system kit designed for traditional landline phone/voip alarm communications to the GeoArm central monitoring station. The VISTA 15P is a high-capacity, feature-rich, 32-zones control panel that delivers more value to the end-user.
The VISTA 15P comes with 6 on-board hardwired zones, up to 16 hardwired zones with expansion (6 on-board + 16 expansion = 22 total hardwired zones) and up to 26 wireless expansion zones. Also, the VISTA 15P supports up to 8 wireless keyfobs, up to 32 user codes and up to 8 schedules. With the VISTA 15P you can have remote programming capability and graphic keypad support. The VISTA 15P's installation advantages, innovative end-user benefits and robust system capacity make the value-priced security system an ideal choice for higher-end DiY installations.
The VISTA 15P security system is backed by Honeywell's 2-year limited manufacturer's warranty and once upgraded with a Honeywell wireless alarm receiver is compatible with the full line of Honeywell 5800-Series wireless security products. GeoArm and Honeywell give you the options you need to fully customize your security system.
VISTA 15P Security System Applications:
- Retail Spaces
- Small Businesses
- Convenience Stores
- Gas Stations
To complete your security system installation, plug in the VISTA 15P transformer into a standard wall outlet and connect the VISTA 15P to a phone jack with live service. You will need long distance service turned on for the phone line alarm communications to work with GeoArm's central station.
When designing your system, keep in mind that the Honeywell VISTA 15P security system supports up to thirty-two (32) total zones with expansion modules but only supports twenty-two (22) hardwired zones with expansion. You should add the Honeywell 4219 hardwired 8-zone expansion modules if you want to add more than six (6) hardwired zones to your VISTA 15P security system.
This VISTA 15P security system kit comes equipped to send its alarm signals over a traditional phone line using the included TELCO 7' phone cord connector (620).
The VISTA 15P has also been proven to work reliably with certain VoIP providers. The recommended VoIP providers are; Comcast Digital Voice, AT&T U-verse, Time Warner Cable, Cablevision, Charter, Cox and Bright House Networks. All of these VoIP providers use an independent IP network which makes their service much more reliable than other popular VoIP providers such as Vonage, Ooma or Magic Jack. If you are going to use VoIP alarm monitoring, make sure your VoIP provider is approved.
If you have never had a monitored security system installed at your property, you will need to run a phone connection from a live phone jack to the alarm control panel. You also need to make sure your phone service has long distance turned on. If you have VoIP service, you need to make sure that the VoIP service is live at the jack you are plugging the VISTA 15P alarm control panel into.
With the rise in cell phone use, more and more people are looking to save money by eliminating their traditional phone service. The VISTA 15P security system allows you to eliminate your monthly phone bill and still get low-cost professional alarm monitoring. You can upgrade the system with an broadband internet communicator (7847i), cellular AT&T LTE communicator (LTEM-XA), cellular Verizon LTE communicator (LTEM-XV), dual-path Verizon IP/LTE communicator (LTE-IV) or dual-path high-security Verizon IP/LTE communicator (LTE-HSV) which would make the installation of the system easier as you wouldn't have to run a wire from your phone block to the VISTA 15P security system. The cellular alarm communicator sends your alarm signals over the cellular AT&T LTE or Verizon LTE network to the GeoArm central monitoring station. With an alternative communicator in place, you would no longer need traditional phone service at the property to monitor your security system. The alternative communicator would also allow you to upgrade to GeoArm's Total Connect interactive alarm monitoring services, which enables you to receive important alerts, keep a close eye on your home and control your security system remotely via the internet and/or mobile devices you use each and every day. Isn't it time you got connected? Save money and take control of your business or home security with GeoArm.
•VISTA 15P has the installation flexibility & expandability to be used in simple configurations, complex installs and everything in between.
-Six hardwired zones
-Expands to 32 total zones (up to 26 wireless and/or 22 hardwired zones)
-16 user codes
-48 event log with date/time stamp
-Two-wire or four-wire smoke detectors
-Fast and easy E2 programming mode
•Security & False Alarm Reducing Enhancements
•VISTA 15P has incorporated SIA false alarm reducing requirements with the latest technology.
-Exit delay reset
-Alarm cancel verification
-Cross zoning/alarm verification
-Short vs. open detection & reporting
-Arming level increase
•Valuable End User System Features
•VISTA 15P offers your customers a choice of system features that add value to any install.
-Easy-to-use single button operation
-Arm Away, Arm Stay, Arm Night, Page
-Quick exit, Quick Arm
-X-10 control & 4 relays supported for home management
-Enhanced paging capabilities
-24-hour monitoring zone
-Compatible keypad family
•Wide Selection of Easy to Use End User Interface Devices
•With superior wireless remote control, phone operation and choice of keypads, VISTA 15P can be easily operated to fit your customers needs.
-Wireless remote control
-5804 - Four button, fully programmable key
-5804BD - Four button, fully programmable key with status feedback for added security
-5827BD - Wireless keypad with status feedback
-Phone Control 4285 - Turns any touch-tone phone into a voice response keypad
▼ Compatible Honeywell Video Security Cameras ▼
Your Price: $201.59
Your Price: $201.59
Your Price: $151.95
Your Price: $206.24