PG9350SL - DSC Wireless PowerG Photoelectric Quad Beams Detector

Please Note: The DSC PG9350SL wireless PowerG photoelectric quad beams detector has been marked special order.

Description
PowerG
Specifications
PDF Documents
Compatible

DSC PG9350SL Product Description:

The DSC PG9350SL is a PowerG wireless photoelectric quad beam detector that provides protection for outdoor perimeters up to 350 feet. The PG9350SL beam detector consists of a receiver and a transmitter. It is designed to detect an intruder and activate an alarm control panel; they are part of a complete system, therefore the manufacturer cannot accept responsibility for any damages or other consequences resulting from an intrusion.

Product Features:

PowerG robust, industry leading commercial grade wireless technology
Aesthetically pleasing slim and compact design
Ideal for commercial applications and large residences
Market-leading perimeter detection using Active Infrared Technology (Photoelectric beams) and PowerG range
Transmitter is designed to send an infrared beam over long distances
Coverage area of 350 ft. with long range model
Easy to install with view finder, alignment dials and LED indicators
Reliable performance with quad beams
Cover and wall tamper protection
Extended battery life with PowerG
Polycarbonate cover protects the cover of the beams from UV rays and other harsh environmental conditions
IP55/IP65 dust-tight and waterproof rating ensures dependable operation even in extreme conditions
Compatible with DSC PowerSeries Neo Systems, DSC PowerSeries Pro, Qolys IQ Panels

DSC PG9350SL PowerG Technology:

Since its introduction in 2010, PowerG has revolutionized the wireless industry. Today, as a result of extensive research and development, it is clear that PowerG's ability to provide robust communication - even in areas that were previously only suitable for hardwired applications - makes it ideal for a wide range of applications.The power of the technology lends itself to a multitude of installs, from residential sites to small enterprises and big-box operations.

Multichannel, Frequency Hopping Spread Spectrum technology - to overcome frequency blocking and interference
Adaptive Transmission Power - for battery life preservation
High transmission ranges - for reliable communication within up to 2km/2187 yards line-of-sight
TDMA synchronized communication technology - to prevent message collisions
128 bit AES encryption - high level protection against analysis tools and digital attacks

DSC PG9350SL Product Specifications:

Dimensions (L x W x D): 17.8 " x 3.3" x 5.4" (452mm x 83mm x 138mm
Range: 350 ft (100 m)
Detection method: Quad Infrared beam interruption detection
Beam frequency selection: 4 channels
Interruption period: Variable between 50, 100, 250, and 500 msec
Power Source: Recommend: 3.6 V, 13.0 Ah LSH20 lithium batteries manufactured by SAFT.
Current draw: 745 µA Transmitter: 420 µA + Receiver: 325 µA (at 25°C, 3.6 VDC)
Battery Life: Transmitter: Approximately 4 years. Receiver: Approximately 5 years (typical use)
Operating Temperature: -4°F - 140°F (-20°C - 60°C)
Operating ambient humidity: 95% (Max.)
Alignment angle: ±90° Horizontal, ±10° Vertical
Weight: 3300 g, includes total weight of Transmitter + Receiver, excluding accessories
International protection: IP65
Supervisory transmission frequency: 912-919 MHz 128/256 second intervals
Alarm indicator (Receiver): Alarm: ON Light receiving: OFF
Level indicator (Receiver): No beam received: ON. Beam receiving: Blinking or OFF
Power indicator (Transmitter): Power ON: ON Power OFF: OFF
Low battery indicator: Voltage reduction: Blinking
Compliance USA: FCC- CFR 47 Part 15 UL Resi/Com Burg: UL639
Compliance Canada: IC RSS – 247 ULC Resi/Com Burg ULC-S306