GD00Z-8-GC - Linear Z-Wave Plus Garage Door Opener Remote Controller Accessory
Linear GD00Z-8-GC Product Description:
The Linear GD00Z-8-GC is a Z-Wave Plus garage door opener remote controller that opens or closes a sectional garage door remotely through a Z-Wave certified Gateway or Security Panel. It is compatible with virtually any automatic garage door opener connected to a sectional garage door manufactured after 1993.
Since 2013 some garage door opener manufacturers have incorporated custom features that utilize a proprietary interface from the wall button to the motor. The GD00Z does not support these special interfaces. The GD00Z-8-GC offers new features such as Z-Wave Plus S2 encryption that provides a more secure method of communication between hub and gateway for added security. Over-the air firmware updates conveniently provide the latest feature enhancements.
Installation is simple, all the installer needs to do is 'pair' the unit into the Gateway, mount the unit, connect two wires and plug it in. The GD00Z-8-GC provides both audible and visual warnings prior to remotely-activated door movement, allowing it to meet UL 325-2010 safety requirements. These built-in measures make this a safe way to remotely open and close a garage door. The GD00Z-8-GC ships with a wireless tilt sensor that attaches to the inside of the garage door, which reports 'open' or 'closed' status to the controller.
Product Features:
- Compatible with majority of older garage door openers
- Easy installation and setup
- Provides audible and visual warnings prior to door movement
- S2 encryption for more secure communication between hub and devices
- Over-the-air firmware updates provide latest product enhancements*
- Z-Wave Plus certification
- Meets UL325-2010 safety requirements
- Range of up to 130 ft. between wireless controller and/or closest Z-Wave receiver module
*Hub/gateway support is required.
Linear GD00Z-8-GC Product Documents:
• Compatibility Notice - Linear GD00Z-8-GC Wireless Z-Wave Plus Garage Door Control Opener
• Installation Guide - Linear GD00Z-8-GC Wireless Z-Wave Plus Garage Door Control Opener
Linear GD00Z-8-GC Product Specifications:
- Controller Dimensions (W x H x D): 6.94 x 1.38 x 5.0
- Tilt Sensor Dimensions (W x H x D): 1.69 x 0.88 x 1.19
- Power: 120VAC, 50/60 Hz
- Garage Door Position Sensor Frequency: 345 MHz
- Z-Wave Frequency: 908.42 MHz
- Range: Up to 130 feet between the wireless controller and/or the closest Z-Wave receiver module
- Scene: Command class
Linear GD00Z-8-GC Not Compatible:
Chamberlain MyQ Models:
- WD962KEV
- KPEV & MLEV
- WD832KEV
- WD1000WF
- HD 930EV
- 950WF & 420EV
- LW500EV
- LW9000WF
- PD752D & KPV
Genie Series III Models:
- PowerMax 1500
- TriloG 1200 & 1500
- IntelliG 1000 & 1200
- CM8600
- Pro 1024, 2028
- PowerLift 900
LiftMaster MyQ Models:
- 2575
- 2585
- 2595
- 3800PLD
- 3585
- 7356
- 7675
- 8155
- 8355
- 8360
- 8500
- 8522
- 8550
- 8557
- 8587W
- 8587WL
Craftsman AssureLink/ MyQ Models:
- 3043
- 30437
Raynor:
- Ultra II
Marantec:
- Synergy 270
OverHead Garage Door:
- Odyssey 1200
Questions & Answers
