ADC-VDB770 - Alarm.com Wi-Fi 1080p Touchless Video Doorbell Camera (in White Finish)

Please Note: The Alarm.com ADC-VDB770 Wi-Fi touchless video doorbell camera, in white finish, has been discontinued and replaced by ADC-VDB750 model number.

Description
Documents
Specifications
Status Lights
Accessories

Alarm.com ADC-VDB770 Product Description:

The Alarm.com ADC-VDB770 is a silver color, touchless, 1080p high definition, WiFi video doorbell camera with video analytics. The ADC-VDB770 doorbell contains a built-in integrated camera, PIR motion sensor, digital microphone and speaker. It is the next-generation video doorbell camera and the latest installment in the Design Studio Series product line, has an expansive 150° vertical Field of View (FOV), allowing you to monitor the entire doorway area. With Two-Way Audio and a full portrait viewing in the app, the doorbell makes it easier than ever to see and speak with visitors. Plus, the ADC-VDB770 uses video analytics to minimize false-positive motion detection and to enable rapid detection of people, so you receive alerts even if visitors don't ring the bell. With the ADC-VDB770 installed do-it-yourselfer's will always know who is at the front door of their home. The ADC-VDB770 enables homeowners the ability to answer the door and speak to visitors via two-way audio, right from their Alarm.com app.

Product Features:

White Color Finish
Expansive FOV (150° V, 115° H)
Full HD (1440 x 1920) video resolution
High dynamic range (HDR)
IR night vision
Video Analytics on the edge for faster, more relevant alerts
Live video and saved clip viewing
Two-Way Audio through the mobile app
Battery heater for low-temperature operation
2x2 antenna for improved Wi-Fi range
Compatible with existing doorbell transformers (requires 16-30 VAC, 10 VA)
Compatible with mechanical and digital chimes

*Please Note: The ADC-VDB770 video doorbell and the ADC-W115C smart doorbell chime do not include an AC or DC transformer (these parts need to be purchased separately). The ADC-VDB770 is packaged with the ADC-VDBA-770BLI battery less insert. Requires ADC-VDBA-770BAT for digital chimes only. The Customer app must be version 4.14+ to view video from the ADC-VDB770 video doorbell. An Apple or Android device is required for use of the Alarm.com app.

Alarm.com ADC-VDB770 Product Documents:

Alarm.com ADC-VDB770 Product Specifications:

Dimensions (W x L x D): 1.7" x 5" x 1.5" in (42 x 127 x 38 mm)
Recording compression: H.264
Color: White
Max resolution: 1440 x 1920
Image sensor: 1/2.7" CMOS, 5 MP, 1440 X 1920
Lens/angle of view: 150° vertical, 115° horizontal
Low-light sensitivity: 0 lux with IR
IR range: Up to 15 feet (5 meters)
Image adjustments: Flip, brightness, contrast, saturation, sharpness, exposure
Wireless connectivity: 802.11 b/g/n/ac, 2.4 GHz & 5 GHz
Operating temperature: -22° - 104° F (-30°C - 40°C)
Operating humidity: <95% condensing RH
Motion sensor: None (Video Analytics used for motion detection)
AC transformer: 16-30V AC, 10-30VA*
DC transformer: 15-30V DC, 8W minimum*

*Important: The power module included with the ADC-VDB770 is required for every installation.

Alarm.com ADC-VDB770 Status Lights:

LED Pattern "Off": Power Off
LED Pattern "Solid Red": No local or Internet connection
LED Pattern "Blinking Red": Power on, camera booting
LED Pattern "Solid Green": Connected to Alarm.com
LED Pattern "Blinking Green": Local network connection
LED Pattern "Double-Blinking Blue": Unable to ring indoor chime
LED Pattern "Blinking Blue": WPS mode (press and hold button for 30-45s)
LED Pattern "Blinking White": WiFi Access point mode (press and hold button for 45-60s)
LED Pattern "Blinking Yellow": Camera power cycling (press and hold button for 60-75s)
LED Pattern "Alternating Red and Green": Camera resetting to factory default (press and hold button for >75s)

Note: If the indoor chime is enabled for the device, holding down the button will trigger a single indoor chime immediately after being pressed. If desired, the indoor chime can be disabled through the Customer Website before pressing the button to initiate one of the above modes.