The Alarm.com Image Sensor (ADC-IS-300-LP Version 3) delivers smarter security with instant visual verification of alarms and increased engagement through on-demand views. Our latest Version 3 model, the ADC-IS-300-LP-BX has been redesigned to deliver higher resolution images, improved night vision, and a wider field of view.
It is ETL certified, battery operated, and communicates with the user's security control panel. Swap out the standard motion sensor used in typical installations, and upgrade to the Alarm.com Image Sensor Version 3.
Integrated with Alarm.com Interactive Services, images are easily accessible to customers. All uploaded images are viewable on the Alarm.com Customer Website or through the mobile apps. Users can even receive images in text or email alerts whenever an image is uploaded whether in the event of an alarm, or on-demand for important events.
Product Features:
ETL certified for UL639 and ULC S306
35-foot detection range with a 90-degree horizontal FOV
Remotely configurable PIR sensitivity (Pet immunity, etc.)
Easy Installation; Simple panel enrollment, No broadband required (No router configuration), Tri-color LED
Battery powered
Tamper detection, walk test mode, supervision
Color images
Night vision; IR illumination, Black and white images
Wireless image transmission to panel
Wireless image transmission to Alarm.com via cellular networks
Note: The Image Sensor is compatible with most Alarm.com supported panels. Some panels require additional hardware.
All service package options have upload limits that reset on the first day of each month. If the upload limit is reached in the previous month, the Image Sensor will resume uploading images according to its capture rules the following month. Images captured during an alarm always upload even if the upload limit is reached. Unused Image Sensor uploads do not carry over from month to month.
Images - Alarms: 50 motion-activated images per Alarm event, across all image-capturing devices, for up to 10 alarm events per month
Images - Limited: 100 panel disarm and alarm image uploads per month over broadband only. This add-on is included by default in the Interactive, Interactive + Automation, and Commercial packages, and only applies to customers using a panel with a panel camera.
Images - Plus: 400 uploads per month for motion-activated alarm uploads and non-alarm (e.g., disarm, Peek-Ins, etc.) events with the base package, with a maximum of 40 uploads per month over a cellular network connection (Up to 200 additional uploads per month can be added to the service package)
Note: Alarm event uploads count towards the limit, but images are always taken in the event of an alarm regardless of if the upload limit was reached.
Extra Image Events: 200 uploads per month, with a maximum of 20 uploads per month over a cellular network connection
Note: For Qolsys panels, Image Upload Count displays in the service package. This option only applies towards the number of PIR camera images that get uploaded for each alarm event. For more information, see the panel-specific guide for Viewing the PowerG PIR camera images.
The 2GIG XCVR3 Transceiver Adapter for the Image Sensor must be installed in the panel.
Device limit 10 image sensors.
2GIG GC2e
Panel firmware version 1.23+
The 2GIG XCVR5e Transceiver adapter for the Image Sensor must be installed in the panel.
Device limit 3 image sensors.
2GIG GC3
Panel version 3.0.1+
The 2GIG XCVR3 Transceiver Adapter for the Image Sensor must be installed in the panel.
Device limit 10 image sensors.
2GIG GC3e
All panel versions are compatible.
The 2GIG XCVR3 Transceiver Adapter for the Image Sensor must be installed in the panel.
Device limit 10 image sensors.
Interlogix Simon XT
Panel version 1.3 & up
Alarm.com modules between versions:
* 146 - 185 require an Image Sensor daughterboard is attached for compatibility.
* Zone 39 must be reserved for the Image Sensor daughterboard, which is hardwired to the panel.
* 187-191j is compatible and does not require an Image Sensor daughterboard to be attached.
Device limit 3 image sensors.
Interlogix Simon XTi
Panel version 1.0+
Alarm.com modules between versions:
* 151 - 185 require an Image Sensor daughterboard is attached for compatibility.
* 187-191j is compatible and does not require an Image Sensor daughterboard to be attached.
Device limit 3 image sensors.
Interlogix Simon XTi-5
All panel versions are compatible.
Alarm.com modules between versions:
* 177 -185 require an Image Sensor daughterboard is attached for compatibility.
* 187-191j is compatible and does not require an Image Sensor daughterboard to be attached.
Device limit 3 image sensors.
Interlogix Concord
Panel version 4.0+
Alarm.com modules between versions:
* 177+ on CDMA or 173+ on HSPA with an Image Sensor daughterboard version 104.0+ attached to the module.
* 187f-189f on Dual-Path LTE. A daughterboard is not required for this module version.
Device limit 3 image sensors.
DSC Impassa
Panel version 1.3+
Requires the Alarm.com module that come with the Image Sensor daughterboard attached. The SKU numbers for these Alarm.com modules are 3G8055(l) or CD8055(l).
Device limit 3 image sensors.
DSC PowerSeries Neo
Panel version 1.10+
Alarm.com module versions:
* 185 and lower must be one of the modules that come with the Image Sensor daughterboard attached. The SKU numbers for these Alarm.com modules are 3G8080(l) or CD8080(l).
* 187+ is compatible and does not require an Image Sensor daughterboard to be attached.
Device limit 3 image sensors.
DSC PowerSeries Pro
Panel version 1.01+
No additional daughterboard required since the communication hardware is built-in to the cellular module.
Device limit 3 image sensors.
DSC Touch
All firmware versions of the DSC Touch are compatible.
No additional daughterboard required since the communication hardware is built-in to the panel.
Device limit 5 image sensors.
Qolsys IQ Panel
All firmware versions of the Qolsys IQ panel are compatible.
No additional daughterboard required since the communication hardware is built-in to the panel.
Device limit 5 image sensors.
Note: Qolsys may refer to the Image Sensor version 1 and 2 as QZ8100 and the Image Sensor version 3 as QZ8103.
Qolsys IQ Panel 2
All firmware versions of the Qolsys IQ Panel 2 are compatible.
Requires the Qolsys Image Sensor daughterboard.
The Qolsys IQ Panel 2 Plus is not compatible since it has a built-in PowerG daughtercard, which uses the same antenna as the Image Sensor daughtercard.
Note: Qolsys may refer to the Image Sensor version 1 and 2 as QZ8100 and the Image Sensor version 3 as QZ8103.