Please Note: The Aeotec ZW056 doorbell and LED light has been discontinued without replacement.
The Aeotec ZW056 is a Z-Wave wireless doorbell, making your front door instantly smarter. Every press of ZW056 doorbell's outdoor button notifies your connected home that someone is at the door, allowing you to receive notifications, a chime in the home, and to activate any devices attached to your Z-Wave system.
From outside to in, ZW056 doorbell uses ultra-low powered wireless communication. There's no wiring necessary, making the installation a breeze. With the ZW056, get smart phone notifications from your Z-Wave system anywhere in the world. Hear and see when someone is at your door via doorbell's LED light alerts and customizable tones. The ZW056 can automatically activate devices at your front door, such as welcome lights and security cameras.
The ZW056 doorbell speaker offers configurable volume and tones and simply plugs into any power outlet. Each speaker module is only 64.8mm wide, 92.3mm high, and 30.8 deep, which is almost the smallest doorbell speaker in the world. With its glass front and LED illuminated push button, the ZW056 doorbell's battery powered button sits at your front door and communicates wirelessly with the rest of the system, which is perfectly designed at only 35.2mm in width, 81.3mm in height and 14.5mm in depth.
The ZW056 doorbell is easy to install. Its speaker simply plugs into a power outlet, and its button can be easily installed beside your front door with double-sided tape or small screws. You'll find those easy installation methods provided in Doorbell's box, along with the USB cable that'll allow you change its alert tones. Customise your doorbell's alert tones simply by uploading new MP3s via the provided USB cable. Doorbell's button ships with a 3V lithium battery pre-installed, so that you can get doorbell up and running right away. Installing ZW056 doorbell's button doesn't get any easier. Just tape it or screw it using the provided screws and tape.
- Easy installation: plug in to a power socket.
- The speaker comes pre-loaded with 5 chimes.
- Upload up to 100 MP3 tones for custom alerts.
- Receive visual alerts from LED lights inbuilt into speaker.
- 80dB audio alerts complement the LED lights in speaker.
- Wirelessly communicates with your Z-Wave network.
- Built upon the latest Gen5 and 500 series Z-Wave.
- Configure the speaker's volume from 40dB up to 80dB.
- Battery powered lasting up to 3 years.
- Wireless range of up to 150 metres / 300 feet.
- Simply install button with 2 screws or tape.
- Receive low battery alerts from your Z-Wave system.
- Operating temperature (for Doorbell): 32°F to 104°F (0°C to 40°C)
- Operating temperature (for Wireless Button): 0°C to 55°C
- Operating humidity: 8% to 80%
- Operating distance: Up to 492 feet/150 meters outdoors
- Storage temperature: -20°C to 70°C
- Repeater: Yes
- Beaming: Yes
- AES128 Secure Encryption: Yes
- Max working power: 2.5W
- Max volume: 80dB
- Wireless Button's battery: Lithium cell CR2450 3 Volt battery
- Waterproofing of Wireless Button: IP54
- Supported audio formats: MP3 or WAV
- AC Input (Standby power): 120V 60Hz, Max: 0.45W
- AC Input (Working band): 908.42MHz