Support Center   1-877-443-6276

PD300EMZ5-1 - 2GIG GoControl Smart EM Lamp Module

PD300EMZ5-1 - 2GIG GoControl Smart EM Lamp Module
PD300EMZ5-1 - 2GIG GoControl Smart EM Lamp Module
Item# PD300EMZ5-1
List Price: $69.04
Your Price: $46.03
Availability: In Stock

PD300EMZ5-1 Product Description:

The PD300EMZ5-1 is a smart EM lamp module designed to be used with the 2GIG GoControl panels. Quickly add dimmable control to a lamp with the EM Lamp Module. A simple plug-n-play device, lighting control has never been easier or Greener. It's unique Energy Monitoring circuitry provides both a visual indication of the amount of energy being used, as well as reports it to the Z-Wave hub for reference. It will also light your path with an integrated LED night light.

The PD300EMZ5-1 module is plugged into any standard grounded AC wall outlet, and the lamp is then plugged into the module. Once connected, the lamp can be dimmed or turned on or off remotely via the Z-Wave controller. The module contains two power receptacles - one controlled, and one pass-through (powered at all times). This Plug-in Lamp Module integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range).

Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status. With AutoSense, one can simply switch the connected lamp's manual switch off, then on, and AutoSense will instruct the PD300EMZ5-1 to turn the lamp on.

Product Features:

  • Energy Monitoring reports energy usage
  • Does not impede 2nd outlet
  • Compatible with most dimmable LED and incandescent light bulbs
  • Z-Wave Plus

PD300EMZ5-1 Product Specifications:

  • Signal (Frequency): 908.42 MHz/916 MHz
  • Maximum Load: 300W maximum for lamps only 120 VAC
  • Range: Up to 130 feet line of sight between the wireless controller and/or the closest Z-Wave device
  • Power Requirements: 120 VAC, 60 Hz
  • Network wide inclusion
  • One controlled and one pass-through outlet
  • Security beaming

Q & A's : 2GIG PD300EMZ5-1 GoControl Smart EM Lamp Module

comments powered by Disqus