Support Center   1-877-443-6276

600-1048-XT-LTE-TL - GE Interlogix Simon XT/XTi/XTi-5/XTi-5i Cellular Telus Canada LTE Alarm Communicator (Powered by Alarm.com)

600-1048-XT-LTE-TL - GE Interlogix Simon XT/XTi/XTi-5/XTi-5i Cellular Telus Canada LTE Alarm Communicator (Powered by Alarm.com)
Please Note: The Alarm.com 600-1048-XT-LTE-TL cellular Telus LTE alarm communicator (for the Simon XT/XTi/XTi-5/XTi-5i panels) has been discontinued without replacement.

Interlogix 600-1048-XT-LTE-TL Product Description:


The Alarm.com 600-1048-XT-LTE-AT is a cellular Telus LTE alarm communicator designed for use with the Simon XT, Simon XTi, Simon XTi-5 and Simon XTi-5i control panels. The 600-1048-XT-LTE-TL enables wireless reporting of all alarms and other system events from the Interlogix Simon XT/XTi/XTi-5/XTi-5i control panel(s) using the Telus LTE wireless (cellular) network to the GeoArm central monitoring station.

The module can be used as the primary communication path for all alarm signaling, or as a backup to a telephone line connection to the GeoArm central monitoring station. The wireless alarm signaling and routing service is operated by Alarm.com. The 600-1048-XT-LTE-TL communicator also features integrated support for Alarm.com's emPower™ solution with built-in Z-Wave capabilities and for Alarm.com's Image Sensor through the built-in Image Sensor radio. Two-Way Voice is conducted over the Telus LTE network, however, this feature is not supported by GeoArm. The 600-1048-XT-LTE-TL module interfaces with the Simon XT (version 1.3 and up), Simon XTi, Simon XTi-5, Simon XTi-5i panel boards, fits into a special compartment inside the panel, and is powered by the control panel and panel battery.

Product Features:

  • Easy to Install
  • Secure Wireless Signaling via Telus LTE Cellular Towers
  • Remotely programmable via Alarm.com's Remote Toolkit
  • Enables Alarm.com interactive monitoring and alerting for end users
  • Integrated support for Alarm.com emPower home automation and energy management platform
  • Compatible with Alarm.com Image Sensor (additional hardware required)
  • Compatible with Simon XT, XTi and XTi-5 panels

Interlogix 600-1048-XT-LTE-TL Product Specifications:


  • Dimensions (H x W): 4.06" x 1.87"
  • Compatibility: Simon XT panels with software versions 1.3 and later, Simon XTi, Simon XTi-5, Simon XTi-5i
  • Power Requirements: 6V nominal
  • Standby Current: 30mA (10mA in PowerSave Mode)
  • Peak Current: 1.7A
  • Operating Temperature Range: 32°F to 120°F (0°C to 49°C)
  • Storage Temperature Range: -30°F to 140°F (-34°C to 60°C)
  • Max. Relative Humidity: 90% (non-condensing)
  • Cellular Network: LTE - Telus
  • Listings: FCC ID: YL6-143470L, IC: 9111A-143470L

Interlogix 600-1048-XT-LTE-TL Tools Needed:


  • Small flat-head and Phillips screwdrivers
  • Screws (included)
  • Antenna (included)
Q & A's : GE Interlogix 600-1048-XT-LTE-TL Simon XT/XTi/XTi-5/XTi-5i Cellular Telus Canada LTE Alarm Communicator (Powered by Alarm.com)

comments powered by Disqus