5808W3 - Honeywell Wireless Heat & Smoke Detector

Description
PDF Documents
Specifications
Compatible

Honeywell 5808W3 Product Description:

The Honeywell 5808W3 is a 3V lithium powered, photoelectronic smoke/heat detector with a built-in wireless transmitter. It is intended for use with any 5800-Series Wireless Receiver/Transceiver for residential installations (for commercial installations, the 5881ENHC or the 5883H receiver is required). The transmitter can send alarm, tamper, maintenance (when control panels are equipped to process maintenance signals), and battery condition messages to the system's receiver. Smoothing algorithms minimize nuisance alarms by smoothing out short term spikes from dust and smoke virtually eliminating nuisance alarms. Since there are no holes to drill or wires to run, you can preserve the beauty of the building while protecting it. The 5808W3 is an ideal smoke detector for those difficult to wire locations, applications where room aesthetics are critical, or where hazardous materials exist. All models also feature a restorable, built-in, fixed temperature (135°F) thermal detector that is also capable of sensing a pre-freeze condition if the temperature is below 41°F.

The 5808W3 contains a piezoelectric horn which generates the ANSI S3.41 temporal pattern in an alarm condition. In alarm, a message is also sent to the wireless control panel. The alarm message is transmitted every 4 seconds until the smoke or heat condition has cleared and the detector has reset. During an alarm condition, pressing the detector’s test switch will silence the piezoelectric horn for 5 minutes. Once the detector has reset, a RESTORE message is transmitted to the control panel. The built-in Drift Compensation algorithm automatically maintains the sensitivity of the detector. Once the detector reaches its limit of compensation, it transmits a maintenance signal to the panel. The mounting base installation is simplified by the incorporation of features compatible with drywall fasteners or other methods that provide a method for securing the detector in place.

Product Features:

Improved Robust RF Field Strength
Smoothing Algorithms
Smart Check
Drift Compensation
Removable Detector Cover and Chamber Top
Approved UL Listings for Residential and Commercial Applications
Additional LED Status Indicators
Easy-to-install Mounting Base
Improved Robust RF Field Strength
Utilizes one long-life 3V lithium battery
Microcontroller runs on an 4.0 MHz clock
Horn operates at 3.3 KHz with sound pressure level of 85dBA at 10 feet
Built-in wireless transmitter, temporal code 3 sounder
Backed by Honeywell's 2-year limited manufacturer's warranty

Honeywell 5808W3 Product Documents:

• Data Sheet for Honeywell Wireless Smoke/Heat Detector (5808W3)
• Installation Guide for Honeywell Wireless Smoke/Heat Detector (5808W3)

Honeywell 5808W3 Product Specifications:

Dimensions: Diameter - 5.3", Height - 2.30"
Weight: 8.5 oz. (without batteries)
Case Color: White
Operating Temperature: 32°F to 100°F (0°C to 37.8°C)
Humidity Range: 0&per; to 95&per; RH, non-condensing
Air Velocity: 1,000 ft./min. max.
Operating Voltage: 2.5–3.6VDC
Standby Current: 8.5 µA avg.
Alarm Current: 35 mA max
Power Source: One 3V CR123A lithium Battery
Replacement Batteries: Duracell DL123A, Sanyo CR123A, Panasonic CR123A, or ADEMCO 466
Audible Output: 85dB min. @ 10 ft
Fixed Temperature Heat Sensor: 135°F Fixed
Agency Listings: UL268 Commercial and Residential

Honeywell 5808W3 Compatible:

• 466
• SENS-RDR
• LYNXR-IFR
• L5100
• L5100-SIA
• L7000
• L5200
• L5200-CN
• L7000LA
• 6152RF
• 6162RF
• 5800
• L5210
• L5210-CN
• L5210LA
• LYRIC CONTROLLER
• LYRIC GATEWAY
• FA1670C-9
• FA1700C-9
• FA245RF
• FA270RF
• FA570RF
• RGDRENSIA
• READYGD-R2
• READYGD-REN
• READYGD-RI
• READYGD3000
• READYGD5000
• FA260RF
• READYGD5100
• READYGD5200
• READYGD7000
• 6150RF
• 6150RFFR
• 5800RP
• 5881ENH
• 5881ENHC
• 5881ENL
• 5881ENM
• 6160RF
• 5881H
• 5881L
• 5881M
• 5883H
• L3000-SP
• L5000
• L5000-CN
• L5000-SIA
• LYNXR-2
• LYNXR-2CN
• LYNXR-2FR
• LYNXR-2SIA
• LYNXR-EN
• LYNXR-ENSIA
• LYNXR-I
• LYNXR-ISIA
• LYNXR-ISP
• V128FBP-9
• V128FBPN
• V250FBP-9