2GIG-TAKE1-345 - 2GIG Wired to Wireless Super Switch Converter Module

Please Note: The 2GIG-TAKE1-345 wired to wireless super switch converter module has been discontinued and replaced by the 2GIG-TAKE100-345 model number.

Description
Specifications
Documents
Includes

2GIG-TAKE-345 Product Description:

The 2GIG-TAKE-345 super switch wireless takeover module is a device that boosts wireless capabilities and coverts 8 hardwired zones into 8 wireless zones. The 2GIG-TAKE-345 works with existing 12-volt control panels. The module is to be mounted next to the existing control panel where the hardwired zones are connected. All of the zones on the super switch act as supervised wireless zones has a 350 feet wireless signal range, and is very easy to install.

Please note, that if the control panel has been removed then a 12?volt power supply with battery backup is required (not supplied).

Product Features:

Eight-channel transmitter
Converts up to eight hardwired loops into eight wireless sensor zones
9-16 VDC, 50 mA
Lithium battery
Can be powered by an existing 3rd party Control Panel
ETL Listed

2GIG-TAKE-345 Product Specifications:

Wireless Signal Range: 350 ft, open air, with 2GIG Wireless Control Panel
Code Outputs: For each of 8 serialized zones: Fault; Restore; Tamper; Low Battery
Transmitter Frequency: 345.00 MHz (crystal controlled)
Transmitter Frequency Tolerance: ±15kHz
Transmitter Bandwidth: 24kHz
Modulation Type: Amplitude Shift Keying?On/Off Keying (ASK?OOK)
Unique ID Codes: Over one (1) million different code combinations
Supervisory Interval: 70 minutes
Peak Field Strength: Typical 50,000 uV/m at 3m
Sensor Dimensions (L x W x H): 3.54 x 2.56 x 1.13 in. (9.0 x 6.5 x 2.9 cm)
Weight (including battery and bracket): 2.85 oz. (80.8 g)
Housing Material: ABS Plastic
Color: White
Operating Temperature Limits: 32°F (0°C) to 120°F (49°C)
Relative Humidity: 5-95% Non-Condensing
Operating Voltage: 9?16 volts DC, 50mA