The DSC TL280LER-AT is a wireless AT&T LTE/HSPA/Internet/Cellular/Dual-Path alarm communicator with RS-232 serial connection, that is compatible with the DSC PowerSeries Neo control panels. The TL280LER-AT ensures reliable back up alarm communication of the phone line for your home or business.
When the TL280LER-AT is connected to the PC-Link connector on a DSC HS2016/HS2032/HS2064/HS2128 control panel(s), the alarm reporting paths can be combined through the Public Switched Telephone Network (PSTN), if so desired, plus the cellular network and internet for increased redundancy to the GeoArm central monitoring station. It conveniently utilizes the cellular network and Internet as back-up to ensure high speed, reliable and secure alarm communications to alleviate any concerns about the possibility of phone line disruption.
With 128-bit AES encryption of the alarm signal, central stations, and DIYer's can be assured that this is the most secure alarm communicator offered. And with programmable (by seconds) supervision heartbeats, the LE2080R-AT communicator's availability is fully monitored. The TL280LER-AT offers full data reporting and remote management which saves time and reduces the maintenance costs. Also, the TL280LER-AT is used as a fundamental tool to deliver visual verification to reduce the high costs that can be incurred by false alarms and unnecessary site-checks.
As more and more homes or businesses move away from traditional phone lines, towards VoIP (Voice over IP) or mobile phones, alternate delivery methods for alarm communication must be explored for security systems. The TL280LER-AT conveniently utilizes the cellular and internet network to reduce the need for dedicated phone lines and/or the impact of phone line interruption. The TL280LER-AT is an ideal solution for both residential and small to medium business environments.
Back up and primary cellular alarm communication
Panel remote uploading/downloading support via cellular
Supervision heartbeats via cellular
128-bit AES encryption via cellular and Ethernet/Internet
Automatically switches from LTE to HSPA (3G) service if LTE service is not available
Individual internet and/or cellular periodic test transmission
Integrated call routing
Remote firmware upgrade capability of the communicator and panel firmware via Ethernet and/or cellular
SIA and Contact ID (CID) formats supported
Supervision heartbeats sent via ethernet/internet
Full event reporting using SIA or Contact ID protocol
SIM Card (included)
Remote activating and programming through C24 Communications