The Honeywell GSMVLP5-4G cellular communicator is the most versatile and reliable communication path for the Honeywell LYNX Touch L5100/L5200 LYNX Touch wireless security systems. This GSM unit supports 2G, 3G and 4G AT&T cellular signals and can be used with GEOARM central station and/or DIY self monitoring via Total Connect 2.0. The SIM card is already included and you will have activate the unit with a certified Alarmnet dealer, such as GEOARM. This is the only unit that does not rely on AC power in order to function. If you lose power the 4G GSM unit will use the backup battery in the LYNX Touch to transmit signals. As long as you have AC power and decent AT&T cellular reception you can setup a cellular security system just about anywhere in the country. Protect you and your family against line cuts on AC, internet and phone.
The GSMVLP5-4G is an optional communication module for use with the Lynx Touch Series (L5100/L5200) controls, and provides wireless communication with the AlarmNet network for delivery of alarm and other messages to the GEOARM monitoring central station. It also supports voice communications between the control panel and the GEOARM central station. The GSMVLP5-4G Cellular Communicator transmits signals to the AlarmNet Control Center (via a GSM cellular network), which in turn routes those signals to your GEOARM central station. Honeywell cellular security systems are extremely versatile and secure! The ability to install a system and have it send signals without an internet or phone connection is a wonderful thing. Whether you have a vacation home, remote warehouse or just simply do not have phone or internet service a cellular communicator is a great option.
•Automatic selection of the best available GSM network
•4G capable using HSPA+ protocol
•Full Contact ID or ADEMCO® High-Speed Reporting -Contact ID reporting using ECP mode with compatible Honeywell control panels or combined with optional dialer capture for non-ECP capable control panels.
•256-bit AES Encryption -Advanced encryption standard used for secure communications.
•Upload/Download -Available with select Honeywell control panels. Requires Compass version 126.96.36.199a or higher.
•Integration -Quick and easy installation of 4G GSM for LYNX Touch L5100 wireless control panel.
•Dynamic Signaling with Certain Honeywell Control Panels -Provides management of control panel dialer and digital cellular communicator. Programmable priority and delays determine signal path.
•Diagnostic LEDs -Provide signal strength and status indications.
•QOS -Quality of Service diagnostics via AlarmNet supply vital information including when a message was received, battery voltage, input voltage, signal strength and message path.
•Web-Based Programming -Allows complete interactive programming from AlarmNet Direct. Login
•Intelligent Supervision -Any message generated serves as a supervision message per optional 24 hour or 30 day intervals. This feature effectively limits required messages to be sent.
•Remote Services Capability* -Optional Honeywell Total ConnectTM Remote Services value-added web-based or SMS system control as well as e-mail notification of system events.
•Six Input Zones -Digital processing for improved detection and false alarm protection.
•Tamper Protected Enclosure -Built-in tamper sends a report when a tamper condition is detected and a restore when cleared.
•Built-in Power Supply -Onboard charging circuit design accommodates back-up battery. Includes primary power and battery supervision.
•Back-Up Battery -6V @ 3.1Ah supplied to deliver up to 24 hours of standby operation.