FF319 - Encore Firefighter Smoke Alarm Detector (for GE/Interlogix)

Encore Firefighter FF319 Smoke Alarm Detector (for GE/Interlogix)
Encore Firefighter FF319 Smoke Alarm Detector (for GE/Interlogix)
Item# ECFF319

Average Customer Rating:
Read Review(s) | Write a Review

Please Note: The Encore FF319 Firefighter smoke alarm detector has been discontinued without replacement.

Encore FF319 Product Description:

The Encore FireFighter™ FF319 is the newest innovation from Encore Controls Inc. It is the easiest, most cost effective way to add fire alarm monitoring to your GE/Interlogix (319) security system. The FF319 FireFighter's unique technology monitors the existing UL smoke detectors within the home. When an alarm is detected a wireless signal is sent to the control panel which in turn contacts the GeoArm central monitoring station. With interconnected hardwired smoke detectors found in most homes today, only one FireFighter is needed to monitor ALL the UL smoke detectors within the home.

With the FF319 wirelessly monitor ANY single or linked UL-listed hardwired smoke detector in a home by simply installing ONE FireFighter within 6 inches of any one of the existing smoke detectors. Please note, the FF319 is an audio detector that is intended only for use with smoke detectors but it does not detect the presence of smoke, heat, or fire directly. This device is not intended to replace smoke, heat or fire detectors in the fire alarm system, it is a secondary listening device.

Product Features:

  • Monitors any UL existing smoke detector
  • Does not impact UL or Fire Marshall approval of existing smoke detectors
  • 100% compatible with GE/Interlogix receivers
  • Uses 1 CR123A long life lithium battery
  • FCC, IC, and ETL listed in US and Canada to UL985 standard

Encore FF319 Product Specifications:

  • Frequency: 319MHz
  • Battery: 3Vdc lithium CR123A (1550 mAh)
  • Battery Life: 5 years
  • Detection Distance: 6 in max
  • Operating Temperature: 32° - 120°F (0° - 49°C)
  • Operating Humidity: 5-95% RH non condensing
  • Maximum Current Draw: 23mA during transmission
  • Supervisory signal interval: 64 min (approx.)
  • Compatible with GE/UTC/Interlogix receivers
  • Compatible with any UL smoke detector including interconnected smoke detectors
Q & A's :

comments powered by Disqus