2GIG-SMKT8e-345 - 2GIG Wireless eSeries Combo Smoke, Heat and Freeze Detector

Description
Specifications
Documents
Includes

2GIG-SMKT8e-345 Product Description:

The 2GIG-SMKT8e-345 is a wireless smoke/heat/freeze alarm sensor intended for use with 2GIG GC2e, GC3e and EDGE eSeries encypted security systems. The SMKT8e-345 is powered by 2 x CR123A batteries, with a 10 year projected battery life, which eliminate the need to run power to the device. The alarm has a built?in wireless transmitter, which communicates with the 2GIG GC2e/GC3e control panel. When smoke, excessive heat or cold is detected, the alarm sounds a loud local alarm and the built?in transmitter sends a signal to the 2GIG eSeries control panel. This alarm detector is designed to provide protection within a 350' foot open range radius from the control panel. The 2GIG?SMTK8e?345 can send alarm, tamper and battery condition messages to the control panel.

The 2GIG SMKT8e-345 smoke/heat/freeze detectors are designed to recognize smoke from common synthetic materials and decrease nuisance alarms from everyday cooking. Using advanced detection algorithms and a sophisticated photo-electric optical sensor, these two detectors meet the new UL standards for the year 2020. The new 2GIG smoke/heat/freeze detector has been designed to detect fire issues earlier, providing a more accurate and timely notice in the event of smoke or fire.

In addition, the SMKT8e-345 sensor helps monitor and report on excessive temperature and temperature variations. A high-temperature alert is sent to the panel and the siren is triggered when the ambient temperature exceeds 134°F. A Rate-of-Rise temperature alert is sent to the panel and siren is triggered when the ambient temperature is at 104°F and rises 15°F or more in one minute, and a freeze warning is sent to the panel if the ambient temperature is below 40°F for more than one minute.

The new UL 217 & 268 smoke alarm standards bring 250 technological changes to traditional smoke detection. Meeting the new UL standards, the 2GIG-SMKT8e-345 smoke/heat/freeze detector provides increased performance and better detection of smoke, including smoke from common synthetic materials found in home furnishings. These synthetic materials generally have a faster burn rate reducing escape time from an average of 17 minutes to 3-4 minutes (UL Press Release - February 2018).

Traditional smoke detectors trigger an alarm when any smoke density reached a specific level, which could have just been normal cooking events. The 2GIG-SMKT8e-345 smoke/heat/freeze detector uses advanced algorithms and a sophisticated optical chamber to improve the detection of smoke particles created by some synthetic materials, separate from organic smoke associated with normal cooking events. The new technology is designed to trigger an alarm faster when synthetic smoke is detected versus smoke from cooking, adding to safety and peace of mind.

Product Features:

Smoke, heat, and freeze detection (Compatible with 2GIG GC2e,GC3e and EDGE Panels)
Meets new UL217 8th edition and UL268 7th edition requirements
Designed to recognize smoke from some synthetic materials
Monitors and reports on excessive temperature variations
Optical smoke detection chamber for improved smoke detection
Rate-of-Rise alert is sent to the panel and a siren is triggered once the room temperature is 104°F and the temperature rises 15 degrees or more in one minute
Extreme high/low temperature alerts
345 MHz
eSeries encryption
Long-lasting battery with projected life of 10 years
2-year product warranty

2GIG-SMKT8e-345 Product Specifications:

Wireless Signal Range: 350 ft (106.7m), open air with Wireless Control Panel
Transmitter Frequency: 345 MHz
Compatibility: GC2e and GC3e Panels only
Supervisory Interval: 70 minutes
Unique ID Codes: Over one (1) billion different code combinations
Supervisory Interval: 70 minutes
Dimensions (D x H): 4.7 x 1.8 inch (120 x 46 mm)
Weight: 0.46 lbs
Color: White
Audible Alarm: > 85dB (A) at 10ft (3m) minimum
High Temperature Level: 134°F ± 4°F
High Temperature Rate of Rise: Temperature above 104°F and increases 15°F or more in one minute
Low Temperature Level: 40°F ± 4°F. Reset at 45°F ± 4°F
Operating Temperature Limits: -40° ? 100°F (4.4° ? 37.8°C)
Operating Relative Humidity: 15-95% Non-Condensing
Battery: 2 x CR123A
Regulatory Listing: UL268 7th Edition, CAN/ULC S529 7th Edition, CSFM
Warranty: 2 years
Projected Battery Life: 10 years

2GIG-SMKT8e-345 Product Documents:

• Installation Instructions for 2GIG-SMKT3-345 Wireless Smoke/Heat/Freeze Alarm (in English)
• Installation Instructions for 2GIG-SMKT3-345 Wireless Smoke/Heat/Freeze Alarm (in Spanish)

2GIG-SMKT8e-345 Product Includes:

(1) Wireless Smoke/Heat/Freeze Alarm
(1) Pack of screws and fixings
(3) AAA Energizer E92 batteries (1.5 V1100mAh) or equivalent

Product Reviews

Other customers rated this item:
5 out of 5 stars

WRITE A REVIEW(Reviews are subject to approval)

I'm Really impressed with the Wireless Range, May 12, 2023

Posted By: Isabella Liu

Very affordable and easy to install in my son's nursery room. I am a DIYer and I added this wireless smoke sensor into my 2GIG EDGE panel and learned it in so simply. I found that GeoArm has made plenty of Youtube videos for all sorts of situations with my panel, so I don't think I will have anymore issues that I cant fix. Thanks GeoArm!