IPCAM-PT2 - Honeywell AlarmNet Total Connect Wireless Pan/Tilt Security Camera

IPCAM-PT2 - Honeywell AlarmNet Wireless Pan/Tilt IP Security Camera
IPCAM-PT2 - Honeywell AlarmNet Wireless Pan/Tilt IP Security Camera

Average Customer Rating: (5 out of 5 based on 1 reviews)

Read Reviews | Write a Review
List Price: $378.00
Your Price: $252.00
Fixed Indoor Pan/Tilt Wireless Security Camera (IPCAM-PT2):  Add Fixed Outdoor Wireless Security Camera (IPCAM-WO):  Add Indoor Low-Light Wireless Security Camera (IPCAM-WL): 

Honeywell iPCAM-PT2 Product Description:

The Honeywell iPCAM-PT2 is a wireless, pan-tilt, internet video security camera for AlarmNet Total Connect 2.0 interactive services. The iPCAM-PT2 is ideal for monitoring your home, business or public facilities. The ipCAM-PT2 comes equipped with a mounting plate, extension cable, GPIO connector, power transformer and camera. The iPCAM-WL is perfect for wall or ceiling mounting, and can be detached by depressing the Unlock button.

This camera is for indoor use only. DO NOT mount this camera within 1 foot of any wireless device. To utilize this camera, you must have an AlarmNet account for a GSM or Internet communicator, or a "Video Only" account activated by GEOARM. Internet access with a router capable of DHCP hosting. For wireless, the router must also support one button WPS data encryption. If this is not available, order the Honeywell WAP/WAP-Plus Wireless Access Point for connection to your router.

Local viewing with this camera can be done through the L5200/L7000 panels at v700657+, the VAM, or the TUXWiFi at v5.1.9.0+. You do not need a Total Connect account for local viewing, but the camera must be connected to the same LAN as the viewing interface.

Some major features of this camera are:
Automatic low-light function (0 Lux level) supported by a special night lens and IR LEDS.
Pan and Tilt color video can be controlled and monitored remotely.
Supports WEP 64/128 bit, WPA or WPA2 Personal encryption.
Supports WPS enrollment (Wi-Fi Protected Setup), which is a standard for easy setup of a secure wireless network.
Auxiliary LED lighting that improves the quality of video up to 15 feet in low-level light situations.
Wired or Wireless communications to a router or access point. Wireless communications utilizes the 802.11n protocol with WPS security. WPS (Wi-Fi Protected Setup) is a standard for easy setup of a secure wireless network.
Color video can be monitored through your Total Connect remote services account. Up to 6 cameras can be used.

IMPORTANT: This camera is for indoor use only. DO NOT mount this camera within one foot (0.3m) of any wireless device.

Video Features:
  • Video Compression - H.264. MPEG-4 SP, M-JPEG
  • Image Control - Brightness, Sharpness, White Balance, Contrast
  • Frame Rate - Up to 30 fps (frames/second)
  • Resolution - 1280 x 720 capable, VGA, QVGA, QQVGA

Sensor and Lens Features:
  • Image Sensor - CMOS 1/4" VGA & HD compatible resolution
  • Miniumum Illumination - 0 Lux (with IR LED)
  • Lens - Fix Focus Lens, Aperture: F2.0, Effective Range | Diagonal View Angle: 55.8° (Horizontal=46.8°, Vertical=35.8°)

Wireless Network (RC8061):
  • Standard - IEEE 802.11b/g/n
  • Encryptions - WEP 64/128 bit, WPA/WPA2 Personal

Honeywell iPCAM-PT2 Product Specifications:

  • Dimensions: 5.7" H x 3.8" W x 3.1" D
  • Case Color: White
  • Weight: 1.5 lbs.
  • Connector Ethernet: RJ-45 for Ethernet, DC Power Jack, 3.5mm Jack for Audio Out, One D/I and One D/O
  • Processors and Memory: SoC: ARM9, 300M Hz | RAM: 128 MB | Flash: 16MB
  • Bright Light LED: White light LED x 4/up to 15 ft.
  • Motion Sensor: Sensitivity Distance 5M
  • Power Adapter: 12V/1A, 100-240VAC
  • Certification: FCC, CE; Power Supply: UL
  • Operating Temperature: 23°C - 122°C (5°F to 50°F)
  • Privacy Button: Privacy button for video enable/disable

Honeywell iPCAM-PT2 Compatible:

• L7000
• L5200
• L5200-CN
• L7000LA
• L5210
• L5210-CN
• L5210LA

Product Reviews

5  The Honeywell iPCAM-PT2,
Posted By:

I needed a camera that was wireless and able to move around my business and Geoarm recommended the Honeywell iPCAM-PT2. It was so easy to install and program to my onsite network. The best thing about it was Geoarm were able to configure the camera to my Total Connect 2.0 app, and now I can see my camera from 1 app not 2. Thank you guy!!!!

Was this rating helpful to you?   Yes No
Click here to review this product
(Reviews are subject to approval)

Q & A's : Honeywell Total Connect IPCAM-PT2 Wireless Pan/Tilt Security Camera

comments powered by Disqus