Please Note: The Honeywell Home Lyric Controller wireless security system kit has been discontinued and replaced by the ProSeries PROA7 and PRO7PLUS kits.
The Honeywell Lyric Controller Dual-Path (WiFi and Cellular AT&T LTE) Security System Kit is not just another all-in-one wireless security system, it's part of a new wireless connected platform. The new Honeywell Lyric wireless connected platform has four key components; the Lyric Controller (LCP500-L), a new line of encrypted SiX-Series security sensors, integrations with the Honeywell Z-Wave Plus smart thermostat and Skybell HD video doorbells. The Lyric System is compatible with previous Honeywell 5800-Series manufactured wireless sensors and detectors except for bi-directional devices such as the 5800WAVE wireless siren and 5828/5828V wireless keypads. The 5800-Series compatibility allows you to reuse existing devices on the new Lyric platform.
Additionally, the new SiX-Series line of devices is easy to install, easy to maintain and provides a higher level of security. The Honeywell Lyric Six-Series wireless line of encrypted sensor's include;
• Lyric Secondary Keypad (LKP500-EN)
• Lyric Keyfob (SiXFOB)
• Lyric Door Window Contact (SiXCT)
• Lyric Mini Door Window Contact (SiXMINICT)
• Lyric Motion Sensor (SiXPIR)
• Lyric Glassbreak (SiXGB)
• Lyric Smoke Detector (SiXSMOKE)
• Lyric Indoor Alarm Siren (SiXSIREN)
• Lyric Home Automation Gateway Hub Kit (LCP300KT)
Future Lyric accessories utilize a true 2.4 GHz 128-bit encryption signal to prevent possible intruders from jamming the RF signals.
This Lyric wireless dual-path security system kit includes; Lyric Controller w/battery and transformer (LCP500-L), AT&T LTE alarm communicator (LYRICLTE-A), three door/window contacts (SiXMINICT), one motion detector (SiXPIR), and a 2-way remote keyfob (SiXFOB).
The Honeywell Lyric Controller is the main control panel for both security and home automation. This is where everything can be manipulated such as programming security sensors, arming/disarming, programming Z-Wave home automation devices, setting automation smart scenes, changing system settings and much more.
Honeywell has made upgrades for the DIY security system market by internalizing the Z-Wave and WiFi radios into the Lyric Controller and adding a dedicated cellular communicator slot on the side of the control panel where you simply install the AT&T LTE (LYRICLTE-A) cellular communicator. The Lyric cellular communicator can be swapped at any time, to increase flexibility in communication providers, as some areas in the country may have better cellular service with one provider over another. To future proof the Lyric System, Honeywell has allotted another radio input for future compatibility in the event there are changes to radio standards. This door is located directly above where the current cellular communicator is to be installed. For DIY installations of the Lyric Security System we recommend adding the (LCP500-DK) which is a desk mount that requires no drilling and the (LT-CABLE) which is the 8' foot power cable. By using both of these products together the DIY installation becomes much easier.
On the bottom of the Lyric alarm control panel, you will find a USB port which is helpful because you can upload photos to create a slideshow which can be presented on the Lyric Controller's 7-inch touchscreen display. Additionally, the USB port is very beneficial as it allows you to install any software updates to your controller with the use of a user-friendly USB stick. Keep in mind, we can also remotely update your controller's firmware if you have our Lyric alarm monitoring services.
The Honeywell Lyric Controller looks similar to previous alarm control panels such as LYNX Touch and 2GIG Go! Control series but, it's NOT. Honeywell has made some major upgrades to the Lyric Security System such as;
Batch programming - While Programming SiX-Series wireless devices into the Lyric System instead of having to individually learn in their serial numbers to connect you can now activate and assign all of the serial numbers by pulling the battery tabs out of your new security sensors. The Lyric Security System is smart enough to assign these sensors to a dedicated zone. Once you have completed pulling the battery tabs out of the SiX-Series wireless sensors you can go back to the alarm control panel to make adjustments on how you want those sensors to react if triggered. Batch programming reduces the overall time used in the installation process. Batch programming is only available with the newer Honeywell Six-Series sensors and not with previous 5800-Series sensors such as 5816 contacts, 5800PIR motion sensors or 5834-4 wireless key fobs.
Smart Scenes - This is one of the best additions to the Lyric Security System because it consolidates older Honeywell LYNX programming modes called "scenes and rules" into what is called smart scenes. Once a Z-Wave home automation device is learned into the controller all you have to do is go to smart scenes to enable that device into a smart scene which tells that sensor how and when to act. This makes the programming of Z-Wave home automation devices into the Lyric Controller one step easier!
GeoFencing - With activation of Total Connect 2.0 and a Second Generation Honeywell Lyric WiFi thermostat you can set up a Geofence which is you where you set up a perimeter distance for example 700 feet from your location and anytime you cross out of the set Geofence your Lyric System can arm itself, close the garage door and raise your thermostats temperature. At the same time when you cross back over that Geofence within 700 feet of your location, your controller can, for example, lower a thermostat and turn on a front porch light. The GeoFencing feature can be manipulated and customized to include the accessories of your liking and doesn't have to be setup how we described.
Lyric Lock - The addition of Honeywell Lyric Lock is useful as it dedicates the Six-Series sensors to communicate with only the originally installed Lyric Controller. So, unless deprogrammed from the controller, the Six-Series sensors are married to the existing Lyric Controller which helps protect your investment.
Front Mounted Camera - The Lyric Security System has added a built-in 2-megapixel security camera on the controller, so that when the security system has disarmed a notification with photo can be sent to you in the form of a text message and email notification. In order for the security camera feature to work, you must have Honeywell Total Connect 2.0 video surveillance services activated.
Built-in microphone - The Honeywell Lyric Controller can now receive voice commands to control Z-Wave automation smart scenes and other features with the use of the built-in microphone. There are three basic commands the Lyric alarm control panel will understand Hello Lyric, OK Lyric Hello and Lyric home. Once the trigger word has been stated you can follow with your smart scene names such as Arrive home or Bedtime. These Smart Scenes can include an array of devices and simultaneously lock a door, lower a connected thermostat, turn on/off or dim lights, close or open a garage door, etc. These automation smart scenes are limited to the connected Z-Wave devices you have.
A new feature of the Lyric Security System is its integrations with the Honeywell Home Z-Wave Plus smart thermostat. Using the ProSeries Z-Wave Plus Smart Thermostat you can control your home or business temperature from just about anywhere while using your smartphone application that can be found in the Apple App Store or Android's Google Play. The ProSeries T6 Smart Thermostat will alert you when your filter needs to be changed and can be controlled with Apple HomeKit. The main purpose of this thermostat is to save energy and have the ability to set your desired temperature before you arrive whether that is cooler or warmer.
The Lyric System has also added integrations with the Skybell Hd Video doorbell as long as it is the dedicated Honeywell DBCAM-TRIM version. The SkyBell is a high-definition video doorbell that lets you enjoy new levels of security, control, and convenience wherever you are in the world. With Skybell you can remotely check doorbell activity on the Honeywell Total Connect® 2.0 Remote Services app, and see, hear and speak to visitors at your door from iPhone® or iPad®. When you activate Total Connect Remote Services to be used in conjunction with the Lyric Security System, you can control the security, compatible IP cameras including, thermostats, Z-Wave lighting, Z-Wave locks and receive text and email alerts via most smartphones, tablets, and computers.
•On-Premises video viewing
-Integrated video: System supports one camera, which can be displayed on the touchscreen. Works with compatible Total Connect Video products only (IPCAM-WIC1, IPCAM-WIC2, ACU)
Alarm communication to AlarmNet and lifestyle messaging via the user's internet connection
-Two-way voice over WiFi
-Enables the Total Connect iOS app (available on iTunes) and the app for Android (available on Google Play)
•Integrated Z-Wave provides control and integration of:
-Scenes, schedules and rules
-Local, automatic and remote control via Honeywell Total Connect
•Push/Pull content through Honeywell Total Connect
-Weather available in Fahrenheit or Celsius (one day or five day forecasts)
-Emergency alerts (tornadoes) - requires Honeywell Total Connect with Information Services Package
-Dealer/central station messages (payments due, sales opportunities, community news)
-End-user requests for sales or service
•Advanced Protection Logic technology
-Alarm can be reported even if the system is tampered with during the entry and communications delay times
•Exit error feature
-Detects difference between an actual alarm and exit alarm caused by leaving a door open after the exit delay expires
•Garage Door Control*
-Up to four garage doors per system
-Automatically control door via scenes, rules and schedules
-Unique garage door icon
-View and monitor garage door status
-Remote notification via Honeywell Total Connect
-Locally open/close garage door from touchscreen or compatible mobile device
-Remotely open/close garage door via Honeywell Total Connect
*Requires 5877GDPK, consisting of the 5877 relay receiver and Z-Wave strobe/sounder. Not compatible with certain garage doors and garage door openers. Garage door control must have working entrapment protection. See installation instructions for details.
▼ Compatible SiX-Series Encrypted Sensors ▼
Your Price: $46.24
Your Price: $29.18
Your Price: $96.29
Your Price: $64.06
Your Price: $96.29
Your Price: $111.24
Your Price: $375.00
Your Price: $24.99
Your Price: $33.74
Your Price: $33.74
▼ Compatible Honeywell Video Security Cameras ▼
Your Price: $214.09
Your Price: $214.09
▼ Compatible Honeywell Home Automation Devices ▼