The Videofied OMV601MB Outdoor MotionViewer® is a wireless, battery-powered PIR motion sensor with an integrated video camera and infrared illuminators. It is designed to detect an intruder, instantaneously record a short video clip and transmit the video to the control panel. The panel then transmits the video alarm signal to the central station for immediate review and dispatch to law enforcement for priority response to a crime-in-progress.
The OMV611 consists of a digital camera, passive infrared motion detector, and S2 View spread spectrum. S2 View is a proprietary Videofied interactive, encrypted wireless circuitry for secure two way communications with the control panel. The camera consists of a CMOS black and white sensor and an 90°, wide angle lens. Four infrared LEDs provide a night illumination distance of up to 40 feet/ 12 meters. For passive infrared detection the standard Fresnel lens covers up to 90° angle and an optimal detection distance of 40 feet / 12 meters from the MotionViewer. For applications where the standard Fresnel lens detection will not work 3 additional lenses and a masking kit are provided. The additional lenses consist of a Horizontal Curtain, Vertical Curtain, and Beam detection patterns.
The MotionViewer is typically installed to secure outdoor areas where there is a temperature fluctuation and areas where broad viewing/detection coverage is needed. When the alarm system is armed and the PIR has a detection, the detector transmits a signal and activates the camera, which captures a 7-10 second video segment. The control panel receives the signal and responds according to system configuration and programming. 3 hardwired inputs allow for 3rd party devices to force the OMV611 to take a video and transmit intrusion and trouble notifications. 1 hardwired output allows the OMV611 to notify a 3rd party device that there has been an intrusion event.
Infrared illumination up to 30 feet from device (using 4 infrared
IP 65 Weatherproof rated
Temperature rated to -20° to +140°F (-30° to +60°C)
Operates for years on one set of AA batteries
RF range between panel and device: 500ft; up to 1000ft for line-of-sight contexts (zero obstruction)
Input/output (3/1) terminals for integrating 3rd party devices
VGA day/night video camera
Doubled wireless transmission speed
Easy battery change
Supervised - Transmits a check-in/status signal to the panel every 8 minutes indicating the unique identification code along with the current detection sensor state, tamper condition, serial number, manufacture date, software revision, and battery state
Tamper - Accelerometer tamper. After setting the location of the device the tamper will alert on any movement of the device including opening of the cover or unscrewing from the mount