The Honeywell VISTA15P-CELL-LTE-HSV-HBDSWAP is a VISTA 15P cellular hybrid (w/6160RF hardwired keypad and wireless receiver) high-security system kit designed for Verizon LTE alarm communications to the GeoArm central monitoring station. The VISTA 15P is a high capacity, feature-rich, 32-zones control panel that delivers more value to the DiYer.
The VISTA 15P comes with 6 on-board hardwired zones, up to 16 hardwired zones with expansion (6 on-board + 16 expansion = 22 total hardwired zones) and up to 26 wireless expansion zones (using the 6160RF keypad's wireless receiver). Also, the VISTA 15P supports up to 8 wireless keyfobs, up to 32 user codes and up to 8 schedules. With the VISTA 15P you can have remote programming capability and graphic keypad support. The VISTA 15P's installation advantages, innovative end-user benefits and robust system capacity make the value-priced hybrid security system an ideal choice for higher-end DiY installations.
Honeywell VISTA 15P Cellular Hybrid Security System Applications:
Honeywell VISTA 15P Cellular Hybrid Security System DiY Installation Notes:
To complete your DiY hybrid security system installation, first wall-mount the VISTA 15P control panel. Next, wall-mount the 6160RF keypad close to the VISTA 20P control panel. Finally, connect the LTE-XV cellular Verizon LTE alarm communicator to the VISTA 15P control panel. You will need an AlarmNet cellular alarm monitoring account activated to work with GeoArm's central station.
When designing your system, keep in mind that the Honeywell VISTA 15P security system supports up to thirty-two (32) total zones with expansion modules but only supports twenty-two (22) hardwired zones with expansion. You should add the Honeywell 4219 hardwired 8-zone expansion modules if you want to add more than six (6) hardwired zones to your VISTA 15P security system. Also, remember you can use the 6160RF keypad's RF receiver that comes included to easily expand your VISTA 15P by up to 26 wireless zones. This VISTA 15P hybrid security system kit comes equipped to send its alarm signals over the cellular high-security Verizon LTE network. The Honeywell LTE-HSV cellular high-security alarm communicator sends your alarm signals over the cellular Verizon LTE network to the GeoArm central monitoring station.
With an AlarmNet alternative communicator in place (such as the LTE-HSV), you would no longer need traditional phone service at the property to monitor your VISTA 15P hybrid security system. The alternative communicator would also allow you to upgrade to GeoArm's Total Connect interactive alarm monitoring services, which enables you to receive important alerts, keep a close eye on your home and control your security system remotely via the internet and/or mobile devices you use each and every day. Isn't it time you got connected? Save money and take control of your business or home security with GeoArm.
•VISTA 15P has the installation flexibility & expandability to be used in simple configurations, complex installs and everything in between. -Six hardwired zones -Expands to 32 total zones (up to 26 wireless and/or 22 hardwired zones) -16 user codes -48 event log with date/time stamp -Two-wire or four-wire smoke detectors -Fast and easy E2 programming mode
•Security & False Alarm Reducing Enhancements
•VISTA 15P has incorporated SIA false alarm reducing requirements with the latest technology. -Exit delay reset -Alarm cancel verification -Unvacated "Auto-Stay" -Cross zoning/alarm verification -Short vs. open detection & reporting -Arming level increase -Telephone-line monitor
•Valuable End User System Features
•VISTA 15P offers your customers a choice of system features that add value to any install. -Easy-to-use single button operation -Arm Away, Arm Stay, Arm Night, Page -Quick exit, Quick Arm -X-10 control & 4 relays supported for home management -Enhanced paging capabilities -24-hour monitoring zone -Compatible keypad family
•Wide Selection of Easy to Use End User Interface Devices
•With superior wireless remote control, phone operation and choice of keypads, VISTA 15P can be easily operated to fit your customers needs. -Wireless remote control -5804 - Four button, fully programmable key -5804BD - Four button, fully programmable key with status feedback for added security -5827BD - Wireless keypad with status feedback -Phone Control 4285 - Turns any touch-tone phone into a voice response keypad
Do-it-yourself (DiY) home security is emerging as a new trend in the security industry as advances in wireless security system technology have eliminated the need for costly professional on-site hardwired installations. GeoArm is the perfect partner for any home security DIYer considering installing a new wireless security system. With 30 years of professional security installation experience, GeoArm has the technical know-how to make your DiY home security installation as easy and seamless as possible. You can be confident that your DiY security system installation will be backed by a team of expert security professionals. We stand out from our competition by providing you with FREE security system programming with our alarm monitoring services (leave the technical process to the pro's), FREE remote technical support, and FREE do-it-yourself videos!
Once GeoArm receives your order for a VISTA 15P security system, you will receive a confirmation email with a link to an easy VISTA 15P programming form where you will fill out your account information and zone descriptions. Once you have mounted and hardwired all your security devices, GeoArm's central alarm monitoring station will help you do a full system test to ensure your VISTA 15P alarm signals are being sent and received correctly.