Videofied XT-Series wireless video-verification ethernet/cellular security system by GeoArm Security. This Videofied XT-Series dual-path kit includes; wireless indoor control panel (XT-IP630), wireless vertical alpha alarm keypad (XMA621), and an wireless indoor MotionViewer camera (IMV601).
The Videofied XT-IP630 is a wireless, battery operated, cellular/ethernet XT control panel designed for securing residential and commercial indoor properties that have adequate cellular reception or an ethernet/IP connection available. With two modes of transmission, Ethernet and Cellular (3G), the XT-IP630 panel ensures maximum safety. In case of Ethernet connection loss, the XT-IP630 panel will switch to cellular (3G if enabled) to transmit alarms and videos.
The XT-IP630, along with all Videofied devices, utilize patented S2View® - Spread Spectrum, AES Encrypted Wireless technology, providing optimum signal integrity and security. Bi-directional RF communication paths between all system devices and the system control panel assure high signal reliability. Integrated RF and Cellular connections allow for addition of external antennas for increased performance. The panel supervises every device (excluding the remote keyfob) to validate current open/close state, tamper condition, serial number, date of manufacture, firmware revision, and battery status.
Videofied's XT-IP630 control panel may be used as the hub for a standalone Videofied system and can also piggyback onto existing burglar alarm panels for a video verification upgrade. Please note, to mount the XT-IP630 in a temperature-controlled office or trailer with available Ethernet connection if outdoor detection is needed to secure a fenced lot or construction site (for example). Test RF ranges to ensure that the panel can communicate to any devices installed outdoors. For system interactivity with VideoApp4All or another smartphone app, Videofied control panels require a power supply (PP4) and Ethernet for communication.
Up to 24 wireless zones/devices
Video Verification - video resolution of 320 x 240 pixels, 0 lux sensitivity, 5-frames per second for approx. 10 seconds total recording time. 220K MPEG file.
Programming - An alphanumeric keypad (XMA621 or WMB621) or the Frontel Installer Software (with the TMT USB Programming Kit) is required for programming and maintenance
Communication to devices - 915 MHz RF (military grade)
RF Range - up to 250 ft (varies by building type and environment)
Arming Options - Alpha keypad (XMA621, WMB621), Prox Tag Arming Station (BR651), Remote (RC601), schedule, VideoApp4All or other smartphone app (conditional, see Notes), existing burglar alarm panel relay trigger to Videofied arming inputs (when panel is in Xtender mode)
Mapping feature to trigger a video upon activation of a programmable input
3 programmable inputs
2 programmable outputs to activate third party devices on site (smoke, gates, strobes, sirens, etc...)
2 dedicated on-board connectors to extend the 3G coverage and the radio coverage
4 Areas with 2 special arming mode and partitions
20 user codes or Badges
4,000 Events history log
Operating temperature range : +14/+104°F (-10/+40°C)
Power : PP1 (4 D-Cell Lithium batteries) or PP4 (12V DC power supply with 4 backup Alkaline batteries for 3-6 months backup power; required if using Ethernet connection or using programmable inputs and/or outputs)
Built-in RJ45 for Ethernet transmission to report to your Monitoring Station in the Frontel protocol
Built-in 3G cellular transmitter to report to your Monitoring Station in the Frontel protocol