Support Center   1-877-443-6276

GE Interlogix Simon XTi-5i Cellular Verizon LTE Wireless Security System Kit (Powered by Alarm.com)

GE Interlogix Simon XTi-5i Cellular Verizon LTE Wireless Security System Kit (Powered by Alarm.com)
Please Note: This Interlogix Simon XTi-5i cellular Verizon LTE security system kit has been discontinued.

GE Interlogix Simon XTi-5i Kit Description:


The GE Interlogix Simon XTi-5i is a cost-effective wireless cellular Verizon LTE security system that offers up to 80 zones of burglary and fire protection, and which complies with SIA False Alarm Standards. The 80-632-3N-XTI5-2 wireless control panel features a 5-inch color LCD touchscreen with selectable user interface which provides at-a-glance system status, and easy to use icon-based system operation all at a cost conscious price point.

With it's uncompromising technology, reliability and self-contained architecture, GE Interlogix's Simon XTi-5i is an easy-to-install, encrypted, wireless security system. This GE Interlogix Simon XTi-5i wireless cellular LTE security system kit includes; (1) wireless control panel 80-632-3N-XT5-2, (1) Alarm.com cellular AT&T LTE alarm communicator 600-1048-XT-LTE-VZ, (3) wireless door/window contacts 60-362N-10-319.5, (1) wireless pet-immune motion detector TX-E721 and (1) remote 4-button keyfob 600-1064-95R.

The Simon XTi-5i is ideally suited for monitoring the security and safety of houses, condominiums and apartments. The ability to add on Z-Wave® lights, thermostats, garage door and door locks, in addition to the GE Interlogix Image Sensor for viewing recorded snap shots and real-time look-ins, make it a perfect solution for whole home security and comfort management.

All these functions can also be controlled remotely using web portal and mobile applications powered by Alarm.com®. Any web enabled device (laptop, smartphone or tablet) provides access to Simon XTi-5i's functionality and even includes lifestyle-enhancing information such as the current outdoor temperature and a four-day weather forecast.

The Simon XTi-5i panel comes standard with 80 wireless zones, or it can be set up with 78 wireless zones and two built-in hardwired supervised burglary zones (normally-closed loop only). The built-in radio receiver works with both crystal and SAW Learn Mode sensors in both encrypted, and un-encrypted formats.

Do-it-yourself (DIY) installations are an emerging new trend in the security industry. Being one of the pioneers in this industry, we are the perfect partner for any DIYer considering an installation of an GE Interlogix Simon XTi-5i wireless security system. With 30 years of professional security installation experience, GeoArm has the technical know-how to make your DIY home security installation as easy and seamless as possible. You can be confident that your DIY security system installation will be backed by a team of real security professionals.

Product Features:

  • 80 wireless zones - two can be hardwired (normally-closed loop only)
  • Simple, no button interface; All interaction occurs via a 5-inch color LCD
  • Selectable user interface (UI) which matches corresponding mobile app
  • At-a-glance status of home and property
  • Actionable status icons; Identify door/window open, Last motion detected, "My property" icon status covers all non-window, non-interior motion changes
  • Menu-based system programming and test
  • Built-in PSTN 2-way voice capability over Cellular LTE module (not supported by GeoArm)
  • Supports both crystal and SAW LearnMode sensors, repeaters
  • Supports 2-way RF products (version-specific)
  • Chime feature for monitoring door, window or motion activity
  • 1 master access code and 8 programmable user access codes of 3 to 6 digits
  • SIA or CID central station reporting formats and Voice Event Notification reporting via Cellular Verizon LTE Communicator
  • Program panel with built-in touch screen or Enterprise Downloader software v6.0 or later
  • Expansion options; Internet-based interactivity (with third-party providers), Support for on-premises remote control with optional talking touchpad or touch screen accessories, Compatible with the GE Interlogix Image Sensor V3, providing on-screen image display

GE Interlogix XTi-5i Kit Specifications:


Electrical


  • Required transformer: Class II, 9VAC, 3.34A, 60 Hz (60899, 60-899-CN in Canada)
  • Fuse: Non-replaceable transformer fuse
  • Backup batteries: 6VDC, 2100mAh, NIMH (600-XTI-BAT)
  • Backup time: 24 hours (fully charged)
  • Battery test: 10 seconds under load every 4 hours
  • Touch Screen: 5" diagonal (4.3" x 2.5"), Resistive Touch Screen; 480x272 resolution, 64k colors


Radio Receiver


  • Type: SAW-controlled superheterodyne
  • Frequency: 319.5 MHz/ Bandwidth 350 kHz
  • Sensitivity: 110 dBm nominal
  • Nom. range without LTE module present: Approximately 1100-ft. open-air receiving range
  • Nom. range with LTE module present: Approximately 800-ft. open-air receiving range


Telephone/modem


  • Dialing: DTMF or pulse
  • Modem: Modified Bell 103 (110 or 300 bps)
  • Telephone interface: Line seizure relay


Inputs/outputs


  • Total input zones:80 or 78 wireless and 2 hardwire (normally-closed loop only)
  • Auxiliary power: Unregulated 5.1 to 12 VDC; power-limited to 250 mA (maximum) @ 10 VDC
  • Siren output: 1 Hardwire Interior Siren (5.1 to 9 VDC)


Digitized voice


  • Digitization type: Continuous Variable Slope Data (CVSD) Modulation
  • Playback rate: 88,200 bits/second


Environmental


  • Operating temperature: 32 to 122°F (0 to 49°C)
  • Relative humidity: 90% max., non-condensing


Physical


  • Color: White
  • Dimensions (LxWxD): 5.97 x 7.24 x 1.71 in. (151 x 183 x 43 mm)
  • Weight, without battery: 1.0 lb. (454 g)
  • Installation: Wall mount
  • Construction, chassis: ABS


Certifications


  • FCC: Part 15, Part 68
  • UL: 985, 1023, 1635/ULC Listing ORD-C102319-74,ULC-S545-M89
  • CSFM: California State Fire Marshall
  • CP01-2010:

GE Interlogix XTi-5i Kit Highlights:


Safe


  • Two-way communication: microphone for emergency two-way communication with monitoring station personnel (not supported by GeoArm)
  • Battery backup: backup power supply keeps the system operational during power failures


Effective


  • Emergency fast-action keys: in monitored systems quickly summon Fire, Medical or Police assistance with one button
  • Integrated siren: siren is compliant with UL listing requirements on sound output, to provide effective alert notice throughout the home
  • Hear clearly: Speaker for voice audio status messages and prompts, live communications with monitoring station personnel and configurable "voice chimes"


Convenient


  • User friendly: simple, icon-driven, touch screen user interface - great for users of all ages!
  • Easy to read: large 5" color LCD touch screen provides "At-a-Glance" status of home and property. Selectable user interface allows for customization to match mobile phone app experience.
  • Stay connected: control lights, thermostats, door locks and other Z-Wave® enabled devices for enhanced convenience, safety and value


Options to make the most of your system


With the optional cellular LTE reporting and Alarm.com features, Simon XTi-5i features remote monitoring and control of your security system for convenient and effective home protection.

  • Receive voice, email or text message reports
  • Remote lighting, locks and thermostat control
  • Monitor household activity in real time
  • Arm/Disarm Simon XTi-5i from anywhere
  • Image capture and display via wireless Image Sensors
  • Powered by Alarm.com for advanced interactive services; Optional HVAC, lighting, and lock control devices with programmable options help promote energy savings, Four-day weather forecast adds value and lifestyle convenience, Z-Wave door lock support and indicator status

At-A-Glance Home Status


Quick, at-a-glance home status provides a complete view of home systems including security, indoor temperature and weather.

Electronic Keypad


Offers user-friendly system control and operation via the electronic keypad.

Thermostat Control


Thermostat control makes it easy to set automation schedules in conjunction with lighting and security events to help save energy and reduce utility bills.

Menu-Based System Programming


Menu-based system programming and testing enables fast and accurate installation of the panel and supported devices.

Q & A's : GE Interlogix Simon XTi-5i Cellular Verizon LTE Wireless Security System Kit (Powered by Alarm.com)

comments powered by Disqus