Support Center   1-877-443-6276

GE Interlogix Concord 4 Phone Line & VoIP Hybrid Security System

GE Interlogix Concord 4 Phone Line & VoIP Hybrid Security System
Please Note: This GE Interlogix Concord 4 phone/voip-line hybrid security system kit has been discontinued.

GE Interlogix Concord 4 Kit Description:

GE Interlogix's full-featured Concord 4 hybrid security system delivers full-featured, hardwired/wireless, modular security solutions for intrusion and fire detection. The Concord 4 is easy to install and simple to use and comes standard with hardwired zones and wireless zones without needing any expansion modules. The Concord 4 hybrid security system supports (8) hardwired zones and (96) wireless zones out of the box. To expand the amount of hardwired zones you can use the GE Interlogix 8-zone input SnapCard or the SuperBus 2000 input module. The Concord 4's installation advantages, innovative end-user benefits and robust system capacity make the value-priced security system an ideal choice for higher-end installations.

The Concord 4 hybrid security system is backed by GE Interlogix Security's limited manufacturer's warranty and compatible with the full line of GE Interlogix wireless security products. GeoArm and GE Interlogix Security give you the options you need to fully customize your DIY home security system. To complete your DIY home security installation, plug in the Concord 4 transformer into a standard wall outlet and connect the Concord 4 to a phone jack with live service. When designing your system, keep in mind that the GE Interlogix Concord 4 hybrid security system supports up to (96) total zones with expansion modules but only supports (8) hardwired zones and (96) wireless zones without expansion. You should add GE Interlogix SuperBus 2000 wired 8-zone expansion modules if you want to add more than (8) hardwired zones to your Concord 4 hybrid security system. We also recommend adding an GE Interlogix ATP 1000 alphanumeric alarm keypad (60-983) which allows you to program your Concord 4 hybrid security system locally.

This Concord 4 hybrid security system kit comes equipped to send its alarm signals over a traditional phone line. The Concord 4 has also been proven to work reliably with certain VoIP providers. The recommended VoIP providers are Comcast Digital Voice®, AT&T U-verse®, Verizon FiOS®, Time Warner Cable®, Cablevision®, Charter®, Cox®, and Bright House Networks®. All of these VoIP providers use an independent IP network which makes their service compatible. Unfortunately, popular VoIP providers such as Vonage®, Ooma® and Magic Jack® are uncompatible for alarm monitoring services. So, if you are going to use VoIP alarm monitoring, please make sure your VoIP provider is on the above list.

If you have never had a monitored security system installed at your property, you will need to run a phone connection from a live phone jack to the alarm control panel. You also need to make sure your phone service has long distance turned on. If you have VoIP service, you need to make sure that the VoIP service is live at the jack you are plugging the alarm control panel into.

With the rise in cell phone use, more and more people are looking to save money by eliminating their traditional phone service. The Concord 4 hybrid security system allows you to eliminate your monthly phone bill and still get low-cost professional alarm monitoring. You can upgrade the system with an cellular 3G alarm communicator (600-1053-3ZWAVEAT) which would make the installation of the security system easier as you wouldn't have to run a phone wire from your phone block to the Concord 4 control panel. The cellular alarm communicator sends your alarm signals over the cellular 3G AT&T network and you would no longer need traditional phone service to monitor your security system. Additionally, the 600-1053-3ZWAVEAT cellular communicator would also allow you to upgrade to GeoArm's interactive alarm monitoring services, which enable you to receive important alerts, keep a close eye on your home and control your security system remotely via the internet and/or mobile devices. Isn't it time you got connected? Save money and take control of your home security with GeoArm.

Do-it-yourself (DIY) installations are an emerging new trend in the security industry. Being one of the pioneers in this industry, we are the perfect partner for any DIYer considering an installation of an GE Interlogix Concord 4 hybrid security system. With 30 years of professional security installation experience, GeoArm has the technical know-how to make your DIY home security installation as easy and seamless as possible. You can be confident that your DIY security system installation will be backed by a team of real security professionals.

Intended Security Applications:

  • Homes
  • Townhomes
  • Apartments/Condos
  • Offices
  • Retail Spaces
  • Small Businesses
  • Warehouses
  • Convenience Stores
  • Gas Stations
  • Churches

GE Interlogix Concord 4 Kit Specifications:

• 6 Partitions
• 8 Built-in Hardwired Zones
• Expandable to 96 maximum hardwired/wireless zones
• Two Onboard Programmable Outputs
• Compatible w/All GE Interlogix® Crystal and SAW Learn Mode Sensors
• SIA CP-01 False Alarm Reduction Standard Compliant
• 2-Wire and 4-Wire Smoke Detector Compatibility
• Panel Auxiliary Power Provides 1 Amp
• Built-in 12 Watt Siren Driver

Q & A's : Interlogix Concord 4 Hybrid Security System

comments powered by Disqus