The Videofied RC601 remote keyfob can arm and disarm the Videofied video surveillance system at distances of up to 300 feet. The RC601 has an encrypted "rolling code" system that changes the actual signal sent to the control panel every time it is used. Audio feedback (beeping) is provided for arming/disarming to verify communication with the panel and indicate entry/exit delay.
Four buttons allow the activation or desactivation of several arming profiles (full arming and 2 special arming profiles).The arming is confirmed by a red double flash from the built-in LED. Disarming is confirmed by a green double flash.
A long press on button 1 or button 2 generates a siren or silent (under duress) panic alarm.
The KF keyfob uses S2View® Spread Spectrum, Videofied®, interactive, encrypted wireless circuitry for secure two-way communication with the control panel.
Operating the system with the keyfob can normally be done from within or outside the premises and requires no access code entries.
One press on the button will launch the system full arming.
One press on the button will disarm the system completely.
One press on the button 1 or 2 will arm specifing areas (device groups) according to the special arming configuration.
A long press on button 1 will generate a panic alarm with siren, a long press on button 2 will generate a silent panic alarm (under duress).
The keyfob is powered by one CR3032 3V Lithium battery that
will last 5 years. The keypad transmits the battery status with
Compact, easy to use
Interactive wireless technology
Built-in user friendly buzzer and LED
Siren and silent panic alarms
Arm specific areas as determined by system configuration/programming
Can initiate siren and silent panic alarms by pressing two buttons
Operate system from within or just outside premises