GeoArm Makes Honeywell Security System Programming Easy!
During programming, you must assign a zone type to each zone, which defines the way in which the Honeywell security system responds to faults in that zone. Zone types are defined below.
Type of Zone Definitions:
: Usually assigned to sensors or contacts on primary entry and exit doors.
: Usually assigned to all sensors or contacts on exterior doors and windows.
: Usually assigned to a zone covering an entry area (i.e.: foyer, lobby, or hallway) that one must pass upon entry (after faulting the entry/exit zone) to reach the keypad. It provides an instant alarm if the entry/exit zone is not violated first, and protects an area in the event an intruder has hidden on the premises before the system is armed, or gains access to the premises through an unprotected area.
Interior with Delay
: Usually assigned to an motion detector when the zone will be always be on delay regardless of whether or not an entry/exit zone was violated first.
24-Hour Silent Alarm
: Usually assigned to a zone containing an panic/emergency button (silent emergency).
24-Hour Audible Alarm
: Usually assigned to a zone containing an panic/emergency button (audible emergency)
24-Hour Auxiliary Alarm
: Usually assigned to a zone containing a button for use in personal emergencies or to a zone containing monitoring devices (i.e.: water or temperature sensors, etc.)
24-Hour Carbon Monoxide
: Usually assigned to any wireless zone with a carbon monoxide detector. This zone type is always active and cannot be bypassed.
: Usually assigned to any wireless zone used as a fire zone. This zone type is always active and cannot be bypassed.